537258
32
Zoom out
Zoom in
Previous page
1/108
Next page
FS 310
English
30
N Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope to full
length – it might otherwise break.
N Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
N Crank the engine until it begins to
fire. After no more than five
attempts, turn the choke knob to e.
N Continue cranking.
N As soon as the engine runs, blip the
throttle trigger so that the slide
control moves to the normal run
position F and the engine settles
down to idle speed.
Make sure the carburetor is correctly
adjusted. The cutting attachment must
not rotate when the engine is idling.
Your machine is now ready for
operation.
At very low outside temperatures
N As soon as the engine runs: Blip the
throttle trigger to disengage the
starting throttle position. The slide
control moves to the normal run
position F – and the engine settles
down to idle speed.
N Open the throttle slightly and warm
up the engine for a brief period.
Stopping the engine
N Push the slide control in the
direction of the arrow on the stop
symbol (h) to STOP-0.
If engine does not start
Choke knob
If you did not turn the choke knob to e
quickly enough after the engine began to
fire, the combustion chamber is flooded.
N Turn the choke knob to e
N Set the slide control, lockout lever
and throttle trigger to the starting
throttle position and start the engine
by giving the starter rope a brisk
strong pull. 10 to 20 pulls may be
necessary.
If the engine still does not start
N Push the slide control in the
direction of the arrow on the stop
symbol (h) to STOP-0.
N Remove the spark plug boot (10).
N Unscrew and dry off the spark plug.
N Open the throttle wide and pull the
starter rope several times to clear
the combustion chamber.
N Refit the spark plug. Connect the
spark plug boot (press it down
firmly).
N Move the slide control to START.
N Set the choke knob to e – even if
the engine is cold.
N Now start the engine.
Adjusting the Throttle Cable
N Check adjustment of throttle cable
see chapter on "Adjusting the
Throttle Cable".
Fuel tank run until completely dry
N After refueling, press the manual
fuel pump bulb at least five times –
even if the bulb is filled with fuel.
N Set the choke knob according to
engine temperature.
N Now start the engine.
273BA003 KN
10
249BA058 KN
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FS 310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FS 310 in the language / languages: English, Spanish as an attachment in your email.

The manual is 3,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FS 310

Stihl FS 310 User Manual - German - 168 pages

Stihl FS 310 Additional guide - Dutch - 20 pages

Stihl FS 310 User Manual - Dutch, French, Italian - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info