537253
38
Zoom out
Zoom in
Previous page
1/98
Next page
37FS 300, FS 350, FS 400, FS 450, FS 480
English / USA
: Thread the rope through the rotor
and secure it in the rotor with a
simple overhand knot.
: Lubricate the rope rotor bearing
bore with non-resinous oil (Special
Accessories).
: Slide rotor onto starter post – turn it
back and forthe until the loop of the
rewind spring engages.
: Fit the pawl (4) and washer (3), and
press the spring clip (2) into
position.
The spring clip must point counter-
clockwise and engage the peg on
the pawl.
Tensioning the Rewind Spring
: Make a loop in the unwound starter
rope and use it to turn the rope rotor
six full revolutions in the direction of
the arrow (see illustration).
: Hold the rotor steady – straighten
the twisted rope.
: Seilrolle loslassen
: Release the rotor and let go of rope
slowly so that it winds onto the rotor.
The starter grip must sit firmly in the
rope guide bush. If the grip droops
to one side: Increase spring tension
by one additional turn.
When the starter rope is fully extended
it must be possible to rotate the rotor at
least another half turn (FS 300, 350) or
one and a half turns (FS 400, 450, 480)).
If this is not possible, the spring is
overtensioned and could break.
: Take one turn of the rope off the
rotor.
: Fit the fan housing.
Replacing the Rewind Spring
Broken parts of the spring may still
be under tension and could be
thrown in your direction when you
pull off the rope rotor and remove
the spring housing. To reduce the
rist of injury, wear eye and face
protection and work gloves for the
following operations:
: Remove the rope rotor as described
in "Replacing the Starter Rope".
FS 400, 450, 480)
: Remove screw from the outer spring
loop.
: Remove parts of old spring.
: Lubricate the new spring with a few
drops of non-resinous oil (Special
Accessories).
256BA034 KN
3
2
4
256BA032 KN
427BA016 KN
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FS 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FS 300 in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FS 300

Stihl FS 300 User Manual - German - 168 pages

Stihl FS 300 Additional guide - Dutch - 20 pages

Stihl FS 300 User Manual - Dutch, French, Italian - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info