537253
25
Zoom out
Zoom in
Previous page
1/98
Next page
24
English / USA
FS 300, FS 350, FS 400, FS 450, FS 480
STIHL PolyCut 40-3 Mowing Head
: Block the output shaft with the stop
pin.
: Position the mowing head on the
shaft.
: Fit the thrust washer (6) – convex
side must face down.
: Screw on the nut (4) counter-
clockwise and tighten it down
firmly.
Remove the stop pin.
Removing the mowing head
: Block the output shaft.
: Unscrew the nut clockwise.
If the mounting nut is too loose,
fit a new one.
Adjusting Nylon Line
Note:
A detailed description is contained in the
instruction sheet supplied with the
mowing head.
SuperCut mowing head
Fresh line is advanced automatically
during mowing work and trimmed to the
correct length by the blade on the
deflector.
Line feed operates only if both lines are
still at least 2.4 in (6 cm) long.
AutoCut mowing head
Hold unit with engine running (mowing
head must rotate) above the lawn.
: Tap the mowing head on the ground
– fresh line is advanced and the
blade on the deflector trims surplus
line to the correct length.
Line feed operates only if both lines are
still at least 1 in (2.5 cm) long.
TrimCut mowing head
Shut off the engine and move the slide
control to 0. Hold mowing head housing
firmly and
: Pull spool up – rotate it about 1/6
turn counterclockwise and allow it to
spring back.
: Pull ends of lines outward.
Repeat the above procedure as
necessary until both lines are 5.5 in
(14 cm) long.
Rotating the spool from one stop to the
next advances about 1.6 in (4 cm) of
fresh line.
4
6
256BA010 KN
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FS 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FS 300 in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FS 300

Stihl FS 300 User Manual - German - 168 pages

Stihl FS 300 Additional guide - Dutch - 20 pages

Stihl FS 300 User Manual - Dutch, French, Italian - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info