537239

Stihl FR460 TC-M Manual

7
Zoom out
Zoom in
Previous page
1/48
Next page
FR 460 TC-M
English
5
– Check cutting tool or attachment for
correct and secure assembly and
good condition.
– Check protective devices (e.g.
deflector for cutting attachment,
rider plate) for damage or wear.
Always replace damaged parts. Do
not operate your machine with a
damaged deflector or worn rider
plate (lettering and arrows no longer
legible).
– Never attempt to modify the controls
or safety devices in any way.
– Keep the handles dry and clean –
free from oil and dirt – for safe
control of the power tool.
– Adjust straps and loop handle to suit
your height and reach – see chapter
on "Fitting the Backpack".
– Check condition of carrying system
and the straps - replace if damaged
or worn.
To reduce the risk of accidents, do not
operate your power tool if it is damaged
or not properly assembled.
For emergencies: Practice quickly
opening the fastener on the waist belt,
loosening the shoulder straps and
setting down the unit. To avoid damage,
do not throw the machine to the ground
when practicing.
Starting the Engine
Start the engine at least 3 meters from
the fueling spot, outdoors only.
Place the powerhead on firm ground in
an open area. Make sure you have good
balance and secure footing. Hold the
powerhead securely. The cutting
attachment must be clear of the ground
and all other obstructions because it
may begin to run when the engine starts.
Observe information in chapter on
"Starting / Stopping the Engine".
Your power tool is a one-person unit. To
reduce the risk of injury from thrown
objects, do not allow other persons
within a radius of 15 meters of your own
position – even when starting.
Do not drop start the power tool – start
the engine as described in the
instruction manual.
To reduce the risk of fire, keep hot
exhaust gases and hot muffler away
from easily combustible materials (e.g.
wood chips, bark, dry grass, fuel).
Holding and Controlling the Power Tool
Make sure you always have good
balance and secure footing.
Carry the powerhead on your back. To
reduce the risk of injury, put the
powerhead on your back only after
starting and making sure the cutting
attachment is not rotating.
Always hold the drive tube firmly with
both hands on the handles – right hand
on control handle and left hand on loop
handle – and always keep the drive tube
on the right side of your body – even if
you are left-handed.
During Operation
Make sure you always have good
balance and secure footing.
To reduce the risk of
injury, avoid contact with
the cutting attachment.
271BA003 KN
Note that the cutting
attachment continues to
run for a short period
after you let go of the
throttle trigger – flywheel
effect.
271BA002 KN
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FR460 TC-M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FR460 TC-M in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FR460 TC-M

Stihl FR460 TC-M User Manual - German, Dutch, French, Italian - 184 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info