52157
20
Zoom out
Zoom in
Previous page
1/84
Next page
FG 1
English
18
Sharpening the Master Cutter
N Sharpen the master cutter with 2 to
3 firm strokes of the file, from the
inside to the outside of the side
plate.
N Make sure the stop bar (1) butts
against the acorn nut (2).
N If necessary, readjust the acorn nut
until it butts against the stop bar –
see "Setting Up".
Sharpening the Row of Cutters
N Use the setting for the master cutter
to sharpen all the other cutters in the
row.
N Swing the filing frame upwards.
N Pull the chain along to the next
cutter in the row – push cutter
against the stop.
Make sure the stop (3) always locates
properly against the back of the cutter
being sharpened.
N Swing the filing frame down.
N Sharpen the cutter.
N Repeat this procedure until all
cutters in one row have been
sharpened.
Sharpening the Second Row of Cutters
After sharpening all the cutters in the
first row, set the filing tool for the second
row of cutters. Follow description under
"Setting Up".
N Swing the filing frame upwards.
N Loosen the knurled nut (1).
N Lift the guide clear of the teeth and
turn it to exactly the same angle
setting on the opposite side.
N Tighten down the knurled nut.
N Turn the guide bar 180° and clamp
it in the bench vise or STIHL bar
vise (special accessory).
N Reset the file.
N Swing the filing frame down.
N Position the round file between the
side plate and depth gauge of the
first cutter in the second row.
N Sharpen the first cutter in the
second row.
Sharpening
1
1
2
2
565BA010 KN
3
565BA012 KN
1
565BA023 KN
565BA024 KN
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FG1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FG1 in the language / languages: German, French, Italian, Spanish as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FG1

Stihl FG1 User Manual - English - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info