52155
34
Zoom out
Zoom in
Previous page
1/40
Next page
As these requirements can be met only
after sufficient and constant practice:
8VHDILOHKROGHU
A file holder must be used for manual
resharpening of Super chain. The correct
filing angle is marked on the file holder.
)RUFKHFNLQJDQJOHV
STlHL filing gauge* (see table)
A universal tool for checking the filing
and side plate angles, depth gauge
setting and cutter length. Also cleans the
guide bar groove and oil inlet hole.
)LOHFRUUHFWO\
'LVFRQQHFWVDZIURPSRZHU
VXSSO\
If you use a file holder or the FG 1:
Leave the chain on the bar.
Clamp the bar in a vise if necessary.
To pull the chain along the bar,
push the hand guard toward the
front handle to disengage the chain
brake. On E 140, 160 and E 180 C,
hold the hand guard in this position
to disengage the coasting brake.
Sharpen chain frequently, take
away as little metal as possible -
two or three strokes of the file are
usually enough
Always file from the inside to the
outside of the cutter.
The file only sharpens on the
forward stroke -
lift the file off the cutter on the back-
stroke.
Hold the file KRUL]RQWDOO\ for all
chain types (at right angle to side of
guide bar) and file according to the
angles marked on the filing tool.
Avoid touching the tie straps and
drive links with the file.
Rotate the file at regular intervals
while filing -
this avoids one-sided wear.
Use a piece of hardwood to remove
burrs from cutting edge.
Check angles with the filing gauge.
$OOFXWWHUVPXVWEHWKHVDPHOHQJWK
If the cutters are not the same length,
they will have different heights. This
makes the chain run roughly and can
cause it to break.
Find the shortest cutter and then file all
other cutters back to the same length.
best to have it done in the workshop on
an electric grinder.
* Special accessory
90°
689BA018 KN
689BA025 KN
90°
60°
85°
70°
80°
35°
10°
30°
689BA022 KN
32 E 220
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl E20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl E20 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info