52267
18
Zoom out
Zoom in
Previous page
1/30
Next page
If you don‘t have a tachometer, do not
set the highspeed adjusting screw any
leaner by turning it beyond the standard
setting.
2SHUDWLRQDWKLJKDOWLWXGH
PRXQWDLQV
Slight correction PD\ be necessary.
Use a WDFKRPHWHU to set the high speed
adjusting screw + to obtain the highest
possible engine speed. From that
position, turn the high speed adjusting
screw + 1/8 counterclockwise (richer)
or as far as stop. Avoid risk of engine
damage which can be caused by lack of
lubrication and overheating -
Check air filter and clean it if
necessary.
Set idle speed correctly.
Warm up the engine.
Turn the high speed adjusting
screw + and low speed adjusting
screw / clockwise (leaner) at
higher altitudes.
Turn the screws very slowly and
carefully - slight changes have a
noticeable effect on the engine’s
running behavior.
&RUUHFWLRQVWRKLJKVSHHGDGMXVWLQJ
VFUHZ
The high speed adjusting screw +
alters the power output and
maximum off-load engine speed.
If you turn this screw too far clock-
wise and make the setting too lean,
there is a risk of engine damage.
6HWWLQJLGOHVSHHG
It is usually necessary to change
the setting of the idle speed
adjusting screw /$ after
every correction to the low
speed adjusting screw /.
(QJLQHVWRSVZKLOHLGOLQJ
Turn the idle speed adjusting
screw /$ clockwise until
the engine runs smoothly.
(UUDWLFLGOLQJEHKDYLRUSRRU
DFFHOHUDWLRQ
Idle setting is too lean.
Turn the low speed adjusting screw
/ counterclockwise until engine
runs and accelerates smoothly.
353BA023
L
LA
%5 
18


Need help? Post your question in this forum.

Forumrules
1

Forum

stihl-br400

Reset search

  • When replacing the magneto what is the gap to the flywheel
    Submitted on 26-8-2021 at 16:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl BR400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl BR400 in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info