52267
6
Zoom out
Zoom in
Previous page
1/30
Next page
:DUQLQJ
To reduce the risk of injury associated
with the inhalation of dust, use a face
filter mask when using your blower in
dusty conditions.
:DUQLQJ
Proper eye protection is a must. Even
though the discharge is directed away
from the operator, ricochets and
bounce-backs can occur during blower
operations.
Never operate a blower
unless wearing goggles or
properly fitted safety glasses
with adequate top and side
protection which comply with
ANSI Z 87.1 (or your appli-
cable national standard).
Blower noise may damage your hearing.
Wear sound barriers (ear plugs or ear
mufflers) to protect your hearing.
Continual and regular users should have
their hearing checked regulary.
7+(%/2:(5
For illustrations and definitions of the
blower parts see the chapter on "Parts
and Controls"!
:DUQLQJ
Never modify a blower in any way. Only
attachments supplied by STIHL or
expressly approved by STIHL for use
with the specific STIHL blower models
are authorized. Although certain un-
authorized attachment are useable for
the STIHL blower, their use may be
extremely dangerous.
7+(86(2)7+(%/2:(5
7UDQVSRUW
Always turn off the engine before taking
the machine off your back and putting it
down. When transporting your unit in a
vehicle, properly secure it to prevent
turnover, fuel spillage and damage to
the machine.
:DUQLQJ
Before starting work, always inspect the
rubber buffers which connect the engine
to the pack frame. If the buffers are torn
or damaged, they should be replaced by
your STIHL dealer. Failure of one or
more buffers may cause the engine or
fuel tank to hit or rub against other parts,
and may lead to serious injury from
increased vibrations or from fire as the
result of fuel leakage.
Adjust carrying harness to suit your size
before starting work.
)XHOLQJ
This STIHL unit uses an oil-gasoline
mixture for fuel (see the chapter on
"Fuel" of your owners manual).
:DUQLQJ
Gasoline is an extremely
flammable fuel. If spilled
or ignited by a spark or
other ignition source, it
can cause fire and
serious burn injury or property damage.
Use extreme caution when handling
gasoline or fuel mix.
Do not smoke or bring any fire or flame
near the fuel.
)XHOLQJLQVWUXFWLRQV
Fuel your machine in well-ventilated
areas, outdoors only. Always shut off the
engine and allow it to cool before refuel-
ing. Relieve fuel tank pressure by
loosening fuel cap slowly. Never remove
fuel filler cap while engine is running.
Select bare ground for fueling and move
at least 10 feet (3 m) from the fueling
spot before starting the engine. Wipe
off any spilled fuel before starting your
blower and check for leakage.
Always tighten fuel filler cap securely
after fueling.
:DUQLQJ
To reduce the risk of serious injury from
burns, never attempt to refuel the unit
until it has been completely removed
from the operator.
%5
6


Need help? Post your question in this forum.

Forumrules
1

Forum

stihl-br400

Reset search

  • When replacing the magneto what is the gap to the flywheel
    Submitted on 26-8-2021 at 16:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl BR400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl BR400 in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info