667197
34
Zoom out
Zoom in
Previous page
1/100
Next page
0458-719-9621-A
32
English
7 Assembling the Blower
Insert the charger plug (4) in the charge socket (5).
The LEDs (6) glow green and show the state of charge.
If the LEDs (6) stop glowing: Disconnect the charger plug
(4) from the charge socket (5).
The blower is fully charged.
Disconnect the plug (2) from the wall outlet (1).
6.2 State of Charge
Press the button (1).
The LEDs (5) glow green for about 5 seconds and indicate
the state of charge.
If the LED on the right flashes green: Recharge the
blower.
6.3 LEDs
The LEDs can indicate the state of charge or malfunctions in
the blower. The LEDs can glow or flash green or red.
The state of charge is indicated when the LEDs glow or flash
green.
If the LEDs glow or flash red: Troubleshooting, @ 17.
Malfunction in blower.
7.1 Mounting the Blower Tube and Nozzle
Switch off the blower and remove the activation key.
Line up the hole (2) and the lug (3).
Push the nozzle (1) onto the blower tube (4).
The nozzle (1) engages audibly and can no longer be
removed.
Line up the lug (6) and the slot (5).
Push the blower tube (4) onto the housing (7).
Rotate nozzle (4) in direction of until it engages.
There is no need to remove the blower tube again.
8.1 Inserting the Activation Key
Insert the activation key (1) in the socket (2).
7 Assembling the Blower
0000-GXX-2268-A0
20-40%
40-60%
60-80%
80-100%
0-20%
1
8 Inserting and Removing Activation
Key
7
2
3
0000-GXX-2275-A0
1
4
5
6
0000-GXX-2269-A0
1
2
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl BGA 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl BGA 45 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info