52153
39
Zoom out
Zoom in
Previous page
1/54
Next page
At temperatures below +10 °C/+50°F -
preheat carburetor as follows:
Remove the carburetor box cover.
Inside the carburetorbox cover:
Move shutter (1) from summer
position to winter position (2).
Heated air is now drawn in from around
the cylinder and mixed with cold air -
this helps prevent carburetror icing.
At temperatures above +20 °C/+70°F:
Return shutter to summer position.
This is essential to avoid engine running
problems and overheating.
Machines with HD filter:
Install a standard filter element in
place of the HD filter.
Refit the carburetor box cover and
tighten down the knob.
At temperatures below -10°C (+14°F):
It is advisable to fit the cover plate* on
the fan housing if you use your saw in
extremely cold conditions (temperatures
below -10°C/+14°F, in powder or drifting
snow).
The cover plate blanks off the lower
slots in the fan housing to help prevent
snow being sucked into the machine.
When the cover plate is fitted, the shutter
in the carburetor box cover must be
moved to the winter position.
If your saw is very cold (frost or ice
on machine), start the engine and
keep it at a high idle speed (with
chain brake disengaged) until it
reaches normal operating
temperature.
In the event of engine running
problems, first check that conditions
for use of intake air preheating still
apply.
*Special accessory
Switching on electric handle heating
Move switch on front handle to #
Move switch back to $
to switch off heating.
There is no risk of overheating
during long periods of operation.
The whole heating system is
maintenance-free.
*Special accessory
1
2
137BA014 KN
137BA015 KN
Winter Operation
137BA016 KN
Electric Handle
Heating
066 37
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 066 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 066 in the language / languages: English as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info