52153
32
Zoom out
Zoom in
Previous page
1/54
Next page
The four positions
of the Master Control lever
To start the engine, move the lever to
"Cold Start" position (1) -
do not use force.
If the Master Control lever is on
"Run" (3): Press down the throttle trigger
interlock - and move the Master Control
lever downward.
"Cold Start" position: Choke shutter is
closed - throttle trigger is in starting-
throttle position. A cold engine should be
started in this position.
As soon as engine begins to fire,
move the Master Control lever to
"Warm Start" position (2):
Move the Master Control lever one
notch upward.
"Warm Start" position:
Choke shutter is open -
throttle trigger is in starting-throttle
position.
If you leave the Master Control lever
in the "Cold Start" position,
the combustion chamber will flood
and stall the engine.
The Master Control lever must be in
"Warm Start" position (2) to start a warm
engine. Also select this position if engine
has been running but is still cold.
The Master Control lever should not be
forced to "Run" position (3) -
it will move to "Run" as soon as the
throttle trigger is activated.
In the "Warm Start" position, continue
cranking after engine begins to fire.
As soon as the engine runs,
immediately blip the throttle trigger
so that the Master Control lever moves to
"Run" - idling position -
normal operating position (3).
To shut down the engine:
Move the Master Control lever upward
to "STOP" position (4):
The stop contact should engage the
contact spring - this cuts off the ignition
system.
Only machines with decompression
valve:
Press in the button (arrow) to open
the decompression valve.
The valve closes automatically as
soon as the engine begins to fire.
For this reason the button should
be pressed in before each starting
attempt.
137BA002 KN
0
1
2
3
4
STOP
Information Before You Start
- don’t start the engine yet! -
133BA001 K
Starting
30 066
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 066 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 066 in the language / languages: English as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info