52153
17
Zoom out
Zoom in
Previous page
1/54
Next page
!
Warning!
An improperly maintained chain brake
may increase the time needed to stop
the chain after activation, or may not
activate at all.
!
Warning!
Never run the chainsaw above idle
speed for more than 3 seconds when
the chain brake is engaged or the chain
is pinched or otherwise caught in the cut.
Clutch slippage can cause excessive
heat, leading to severe damage of the
motor housing, clutch and oiler compo-
nent and may interfere with the operation
of the chain brake. If clutch slippage in
excess of 3 seconds has occured, allow
the motor housing to cool before pro-
ceeding and check the operation of your
chain brake as described in the chapter
entitled “Chain Brake”. Also make sure
that the chain is not turning at idle speed
(see above “Important Adjustments”).
Low kickback saw chain and reduced
kickback bars"
STIHL offers a variety of bars and
chains. STIHL reduced kickback bars
and low kickback chains are designed to
reduce the risk of kickback injury. Other
chains are designed to obtain higher cut-
ting efficiency or sharpening ease but
may result in higher kickback tendency.
STIHL has developed a color code
system to help you identify the STIHL
reduced kickback bars and low kick-
back chains. Cutting attachments with
green warning decals or green labels on
the packaging are designed to reduce
the risk of kickback injury. The matching
of green decaled powerheads under 3.8
cubic inch displacement with green
labeled bars and green labeled chains
gives compliance with the computed
kickback angle requirements of ANSI B
175.1-1991 when the products are in
their original condition. Products with
yellow decals or labels are for users with
extraordinary cutting needs and
experience and specialized training for
dealing with kickback.
STIHL recommends the use of its
green labeled reduced kickback bars,
green labeled low kickback chains
and a STIHL Quickstop chain brake
for both experienced and inexpe-
rienced chainsaw users.
Please ask your STlHL dealer to properly
match your powerhead with the appro-
priate bar/chain combinations to reduce
the risk of kickback injury. Green labeled
bars and chains are recommended for all
powerheads. See your “STIHL Bar and
Chain Information” leaflet for details.
!
Warning!
Use of other, non-listed bar/chain combi-
nations may increase kickback forces
and increase the risk of kickback injury.
New bar/chain combinations may be
developed after publication of this litera-
ture, which will, in combination with
certain powerheads, comply with § 5.12
of ANSI B 175.1-1991. Check with your
STIHL dealer for such combinations.
!
Warning!
Reduced kickback bars and low kickback
chains do not prevent kickback, but they
are designed to reduce the risk of kick-
back injury. They are available from your
STIHL dealer.
!
Warning!
Even if your saw is equipped with a
Quickstop, a reduced kickback bar
and/or low kickback chain, this does not
eliminate the risk of injury by kickback.
Therefore, always observe all safety
precautions to avoid kickback situations.
15
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 066 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 066 in the language / languages: English as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info