52151
15
Zoom out
Zoom in
Previous page
1/55
Next page
It may also occur during limbing.
The greater the force of the kickback
reaction, the more difficult it becomes for
the operator to control the saw. Many
factors influence the occurrence and
force of the kickback reaction. These
include chain speed, the speed at which
the bar and chain contact the object, the
angle of contact, the condition of the
chain and other factors.
The type of bar and saw chain you use
is an important factor in the occurrence
and force of the kickback reaction.
Some STIHL bar and chain types are
designed to reduce kickback forces.
STIHL recommends the use of reduced
kickback bars and low kickback chains.
ANSI B 175.1-1991 chainsaw kickback
standard
Section 5.12 of ANSI standard B 175.1–
1991, sets certain performance and
design criteria related to chainsaw
kickback.
To comply with section 5.12 of ANSI B
175.1-1991:
a) saws with a displacement of less than
3.8 cubic inches
must, in their original condition,
meet a 45° computer derived
kickback angle when equipped with
certain cutting attachments.
and must be equipped with at least
two devices to reduce the risk of
kickback injury, such as a chain
brake, low kickback chain, reduced
kickback bar, etc.
b) saws with a displacement of 3.8 cubic
inches and above
must be equipped with at least one
device designed to reduce the risk
of kickback injury such as a chain
brake, low kickback chain, reduced
kickback bar, etc.
The computer derived angles for saws
below 3.8 cubic inch displacement are
measured by applying a computer
program to test results from a kickback
test machine.
!
Warning!
The computer derived angles of § 5.12 of
ANSI B 175.1-1991 may bear no rela-
tionship to actual kickback bar rotation
angles that may occur in real life cutting
situations. Compliance with § 5.12 of
ANSI B 175.1-1991 does not automatic-
ally mean that in a real life kickback the
bar and chain will rotate at most 45°.
!
Warning!
In order for powerheads below 3.8 cubic
inch displacement to comply with the
computed kickback angle requirements
of § 5.12 of ANSI B 175.1-1991 use only
the following cutting attachments:
bar and chain combinations listed as
complying in the “Specifications”
section of the Owner’s Manual or
other replacement bar and chain
combinations marked in accordance
with the standard for use on the
powerhead or
replacement chain designated
“low kickback saw chain’’.
See the section on "Low kickback saw
chain and reduced kickback bars"
13
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 046 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 046 in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info