52149
50
Zoom out
Zoom in
Previous page
1/54
Next page
Engine
STIHL single cylinder two-stroke
engine
Displacement: 70.7 cm
3
(4.31 cu.in)
Bore: 50 mm (1.97 in)
Stroke: 36 mm (1.42 in)
Idle speed: 2,500 r.p.m.
Maximum engine
speed
(cut-off speed): 13,500 rpm
Ignition System
Type:
Electronic magneto ignition (breakerless)
Spark plug (suppressed):
Bosch WSR 6 F or NGK BPMR 7 A
Heat range 200
Electrode gap 0.5 mm (0.02 in)
Spark plug thread: M 14x1.25; 9.5 mm
(0.37 in) long
Fuel/Oil System
Carburetor: All position diaphragm
carburetor with integral fuel pump
Air filter: Prefilter and bisectional boxfilter
Special accessory:
Heavy-duty (HD)-airfilter
Fuel mix: See chapter “Fuel”
Fuel tank capacity: 0.8 l (1.69 US pt)
Oil tank capacity: 0.33 l (0.7 US pt)
Weight
without bar and chain
044: 5.9 kg (13 lb)
044/W with electrically
heated handles: 6.1 kg (13.4 lb)
Cutting Attachment
Recommended cutting attachments
for compliance with § 5.12 of ANSI
Standard B 175.1-1991
(see page 15 of this Manual):
STIHL reduced kickback bar
(with green label) for 3/8" pitch:
Rollomatic with sprocket nose
40, 45 or 50 cm (16, 18 or 20 in)
STIHL low kickback chain*
(with green label) for 3/8" pitch:
9.32 mm (3/8") Rapid-Micro 2
(33 RM 2, 36 RM 2)
Chain sprocket:
7-tooth for 3/8" pitch spur sprocket
In order to comply with the kickback
performance requirements of § 5.12
of ANSI Standard B 175.1-1991,
do not use replacement saw chain
unless it has been designated as
meeting the ANSI § 5.12 requirements
on this specific powerhead, or has been
designated as “low kickback” saw chain*
in accordance with the ANSI B 175.1-
1991 standard.
*See definition of “low kickback chain” on
page 15 of this Manual.
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
Other bars and chains available for this
powerhead are:
STIHL yellow-labeled bars:
for 3/8" pitch:
Rollomatic “S” with sprocket nose
40, 45, 50, 63, 70, 75, 80 or 90 cm
(16, 18, 20, 24, 28, 30, 32 or 36 in)
Duromatic with stellite tipped nose
40, 45, 50 or 63 cm (16, 18, 20 or 24 in)
STIHL yellow-labeled chains:
for 3/8" pitch:
Topic-Micro (36 TM),
Topic-Super (33 TS, 36 TS),
Rapid-Micro (33 RM, 36 RM, 33 RMF),
Rapid-Super (33 RS, 33 RS 1, 36 RS,
36 RS 1, 33 RSL, 36 RSL, 33 RSF,
33 RSLF, 36 RSLF, 36 RSLH).
Chain sprocket: 8-tooth 3/8" rim sprocket
*See definition of “low kickback chain”
on page 15.
Specifications
48 044
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 044 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 044 in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info