52149
2
Zoom out
Zoom in
Previous page
1/54
Next page
A. Kickback Safety Precautions
!Warning!
Kickback may occur when the nose
or tip of the guide bar touches an
object, or when the wood closes in
and pinches the saw chain in the
cut. Tip contact in some cases may
cause a lightning fast reverse
reaction, kicking the guide bar up
and back towards the operator.
Pinching the saw chain along the
top of the guide bar may push the
guide bar rapidly back towards the
operator. Either of these reactions
may cause you to lose control of the
saw which could result in serious
personal injury.
Section 5.12 of ANSI B 175.1-1991
sets certain performance and
design criteria related to chainsaw
kickback. STIHL has developed a
color code system using green and
yellow to help you select a power-
head, bar and chain combination
that complies with the kickback
requirements of the ANSI Standard.
See the sections entitled "Safety
Precautions" and "Specifications"
of this manual.
Do not rely exclusively upon the
safety devices built into your saw.
As a chainsaw user, you should
take several steps to keep your
cutting jobs free from accident or
injury.
1. With a basic understanding of
kickback, you can reduce or eli-
minate the element of surprise.
Sudden surprise contributes to
accidents.
2. Keep a good firm grip on the
saw with both hands, the right
hand on the rear handle,
and the left hand on the front
handle, when the engine is run-
ning. Use a firm grip with
thumbs and fingers encircling
the chainsaw handles.
A firm grip will help you reduce
kickback and maintain control
of the saw.
Don’t let go.
3. Make sure the area in which you
are cutting is free from obstruc-
tions. Do not let the nose of the
guide bar contact a log, branch,
or any other obstruction while
you are operating the saw.
4. Cut at high engine speeds.
5. Do not overreach or cut above
shoulder height.
6. Follow manufacturer’s
sharpening and maintenance
instructions for the saw chain.
7. Only use replacement bars and
chains specified by the manu-
facturer or the equivalent.
8. Reduced kickback bars and low
kickback chains are designed
to reduce the risk of kickback
injury. Ask your STIHL dealer
about these devices.
B. Other Safety Precautions
1. Do not operate a chainsaw with
one hand! Serious injury to the
operator, helpers, bystanders,
or any combination of these
persons may result from one-
handed operation. A chainsaw
is intended to be used with two
hands.
2. Do not operate a chainsaw when
you are fatigued.
3. Use safety footwear; snug-fitting
clothing; protective gloves; and
eye, hearing, and head protect-
ion devices.
Important Safety Precautions for Chain Saw Users
continued on the back inside cover
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 044 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 044 in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info