52143
45
Zoom out
Zoom in
Previous page
1/56
Next page
7HQVLRQLQJUHZLQGVSULQJ
Make a loop in the unwound starter
rope and use it to turn the rope
rotor six full revolutions in the
direction of the arrow.
Hold the rotor steady -
straighten the twisted rope -
Release the rotor -
Let go of rope slowly so that it
winds onto the rotor.
The starter grip must sit firmly in the
rope guide bush. If the grip drops to
one side: Increase spring tension
by one additional turn.
When starter rope is fully extended
it must be possible to rotate the
rotor at least another half turn. If
this is not possible, the spring is
over-tensioned and could break.
Take off one turn of the rope.
Fit the fan housing on the crank-
case.
Set the Master Control lever to E
Push the remaining rope into the
starter grip so that the nipple 
is flush with the grip.
5HSODFLQJDEURNHQ
UHZLQGVSULQJ
Lubricate the new spring with a few
drops of non-resinous oil.
Remove the rope rotor-
see "Replacing Starter Rope".
Remove the spring housing and
parts of spring.
Fit the new spring housing -
bottom plate must face upward -
slip outer spring loop over lug -
Reinstall the rope rotor, tension the
rewind spring, fit the fan housing
and secure in position.
If the spring pops out of its housing
during installation: refit it in the
counterclockwise direction, starting
outside and working inward.
001BA006 K
001BA007 K
8
 
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 036 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 036 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info