52128
122
Zoom out
Zoom in
Previous page
1/125
Next page
30
English / USA
Chainsaw Safety Manual
Definitions
1 Twist Lock
Lock for carburetor box cover.
2 Carburetor Adjusting Screws
For fine tuning the carburetor.
3Fuel Pump
Fills carburetor with fuel to simplify
starting.
4 Decompression Valve
Releases compression pressure to
make starting easier.
5 Chain Brake
A device to stop the rotation of the
chain if activated in a kickback
situation by the operator's hand or
by inertia.
6 Muffler
Reduces engine exhaust noise and
directs the exhaust gases.
7 Chain Sprocket
The toothed wheel that drives the
saw chain.
8 Chain Sprocket Cover
Covers the clutch and the sprocket.
9 Chain Catcher
Helps to reduce the risk of operator
contact by a chain if it breaks or
comes off the bar.
10 Chain Tensioner
Permits precise adjustment of chain
tension.
11 Chain Tensioner
Permits precise adjustment of chain
tension.
12 Guide Bar
Supports and guides the saw chain.
13 Oilomatic Saw Chain
A loop consisting of cutters, tie
straps and drive links.
14 Adjusting Wheel
Permits precise adjustment of chain
tension.
15 Handle of Wingnut
Must be released to allow chain to
be tensioned with adjusting wheel.
16 Oil Filler Cap
For closing the oil tank.
17 Bumper Spike
Toothed stop for holding saw steady
against wood.
18 Front Hand Guard
Provides protection against
projecting branches and helps
prevent left hand from touching the
chain if it slips off the handlebar. It
also serves as the lever for chain
brake activation.
19 Front Handle (Handlebar)
Handlebar for the left hand at the
front of the saw.
20 Starter Grip
The grip of the starter, for starting
the engine.
21 Spark Plug Boot
Connects the spark plug with the
ignition wire.
22 Master Control Lever
Lever for choke control, starting
throttle, run and stop positions.
23 Fuel Filler Cap
For closing the fuel tank.
24 Throttle Trigger
Controls the speed of the engine.
25 Throttle Trigger Interlock
Must be depressed before the
throttle trigger can be activated.
122


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 028 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 028 in the language / languages: English as an attachment in your email.

The manual is 20,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info