466729
50
Zoom out
Zoom in
Previous page
1/56
Next page
(QJLQH
STIHL single cylinder two-stroke engine
Displacement: 48.7 cm
3
(2.97 cu.in)
Bore: 44 mm (1.73 in)
Stroke: 32 mm (1.26 in)
Idle speed: 2.800 r.p.m.
,JQLWLRQ6\VWHP
Type:
Electronic magneto ignition
(breakerless)
Spark plug (suppressed):
Bosch WSR 6 F
or NGK BPMR 7 A
Electrode gap 0.5 mm (0.02 in)
Spark plug thread:
M 14x1.25; 9.5 mm (0.37 in) long
)XHO2LO6\VWHP
Carburetor:
All position diaphragm carburetor with
integral fuel pump
Air filter:
Prefilter and bisectional box filter
Fuel capacity: 0.46 l (0.97 U.S. pt)
Fuel mixture: See chapter "Fuel"
Chain lubrication:
Fully automatic, speedcontrolled plunger
type oil pump. Additional manual oil flow
control
Oil tank capacity: 0.29 l (0.61 US pt)
:HLJKW
(without bar and chain)
026; 4.7 kg (10.4 lb)
026 W 4.9 kg (10.8 lb)
&XWWLQJ$WWDFKPHQW
Recommended cutting attachments
for compliance with § 5.12 of ANSI
Standard B 175.1-1991
(see page 12 of this Manual):
STIHL reduced kickback bar
(with green label):
for 0.325" pitch and 3/8" pitch:
Rollomatic with sprocket nose
40, 45 or 50 cm (16, 18 or 20 in)
STIHL low kickback chain*
(with green label):
8.25 mm (0.325") Rapid-Micro 2
(26 RM 2),
9.32 mm (3/8") Rapid-Micro 2
(33/36 RM 2)
Chain sprocket:
7-tooth for 0.325" pitch,
7-tooth for 3/8" pitch
Other cutting attachments available for
this powerhead are:
STIHL yellow-labeled bar:
for 0.325" pitch and 3/8" pitch:
Rollomatic "S" with sprocket nose
40, 45 or 50 cm (16, 18 or 20 in)
Duromatic with stellite tipped nose
40, 45 or 50 cm (16, 18 or 20 in)
STIHL yellow-labeled chains:
for 0.325" pitch:
Rapid-Micro (26 RM) and
Rapid-Super (26 RS)
for 3/8" pitch:
Rapid-Micro (33/36 RM) and
Rapid-Super (33/36 RS)
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
In order to comply with the kickback
performance requirements of § 5.12
of ANSI Standard B 175.1-1991,
do not use replacement saw chain
unless it has been designated as
meeting the ANSI § 5.12 requirements
on this specific powerhead, or has been
designated as "low kickback" saw chain*
in accordance with the ANSI B 175.1-
1991 standard.
*See definition of "low kickback chain"
on page 11 of this Manual.
6SHFLILFDWLRQV
 
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 026 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 026 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl 026

Stihl 026 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info