466729
45
Zoom out
Zoom in
Previous page
1/56
Next page
%RWKYHUVLRQV
Coat rope rotor bearing bore with
non-resinous oil -
slip rotor over starter post - turn it
back and forth so that anchor loop
of rewind spring engages -
Refit the pawl  in the rotor -
fit the washer  on the starter post
- use screwdriver or suitable pliers
to install spring clip 
on starter post and engage it on the
pawls peg - the spring clip must
point clockwise - see illustration.
7HQVLRQLQJUHZLQGVSULQJ
Make a loop in the unwound starter
rope and use it to turn the rope ro-
tor six full revolutions clockwise.
Hold the rotor steady -
straighten the twisted rope -
release the rotor -
let go of rope slowly so that
it winds onto the rotor.
The starter grip must locate firmly
in the rope guide bush.
If the grip droops to one side:
Add one more turn on rope rotor
to increase spring tension.
When starter rope is fully extended
it must still be possible to rotate
the rotor at least another half turn.
If this is not the case, the spring
is overtensioned and could break.
Take one turn off the rope.
Refit the fan housing.
5HSODFLQJDEURNHQUHZLQGVSULQJ
Lubricate the new spring with
a few drops of non-resinous oil.
Remove the rope rotor -
see ,,Replacing Starter Rope -
remove the spring housing
and parts of spring -
fit the new spring housing -
bottom plate must face upward -
slip outer spring loop over lug.
Reinstall the rope rotor,
tension the rewind spring,
fit the fan housing and secure in
position.
If the spring pops out of its housing
during installation:
refit it in the counterclockwise
direction, starting outside and
working inward.
133BA017 KN
2
1
3
133BA020 KN
133BA021 KN
 
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 026 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 026 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl 026

Stihl 026 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info