52140
49
Zoom out
Zoom in
Previous page
1/54
Next page
Specifications
Engine
STIHL single cylinder two-stroke engine
017
Displacement: 30.1 cm
3
(1.89 cu. in)
Bore: 37 mm (1.46 in)
Stroke: 28 mm (1.10 in)
018
Displacement: 31.8 cm
3
(1.91 cu. in)
Bore: 38 mm (1.50 in)
Stroke: 28 mm (1.10 in)
Ignition System
Electronic magneto ignition
Spark plug (suppressed):
BOSCH WSR 6 F
NGK BPMR 7 A or
Champion RCJ 6 Y
Heat range 200
Electrode gap 0.5 mm (0.02 in)
Spark plug thread M 14x1.25,
9.5 mm (0.37 in) long
Fuel/Oil System
Carburetor:
All position diaphragm carburetor
with integral fuel pump
Air filter:
Felt mat
Fuel tank capacity:
0.25 l (0.53 US pt)
Fuel mix:
See chapter “Fuel Mix”
Chain lubrication:
Fully automatic speed-controlled
rotary piston oil pump.
Oil tank capacity:
0.15 l (0.32 US pt)
Weight
without bar and chain
017: 3.9 kg (8.60 lbs)
018: 3.9 kg (8.60 lbs)
Cutting Attachment
Recommended cutting attachments
for compliance with § 5.12 of ANSI
Standard B 175.1-1991
(see page 12 of this Manual):
STIHL reduced kickback bar
(with green label)
for 3/8" Picco pitch:
- Picco Micro Mini gauge (1.1 mm)
- Picco Micro gauge (1.3 mm)
Rollomatic with sprocket nose
30 or 35 cm (12 or 14 in)
STIHL low kickback chain*
(with green label) for 3/8" Picco pitch:
9.32 mm (3/8") Picco Micro Mini (61PMN)
9.32 mm (3/8") Picco-Micro1 (63 PM1)
Chain sprocket:
6- tooth for 3/8" Picco pitch
Since new bar/chain combinations may be
developed after publication of this Manual,
ask your STIHL dealer for the latest STIHL
recommendations.
In order to comply with the kickback
performance requirements of § 5.12
of ANSI Standard B 175.1-1991,
do not use replacement saw chain
unless it has been designated as
meeting the ANSI § 5.12 requirements
on this specific powerhead, or has been
designated as “low kickback” saw chain*
in accordance with the ANSI B 175.1-
1991 standard.
* See definition of “low kickback chain”
on page 12 of this Manual.
017, 018 47
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 018 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info