52087
46
Zoom out
Zoom in
Previous page
1/53
Next page
44
: Hold the file horizontally for all
chain types (at right angle to side of
guide bar) and file according to the
angles marked on the filing tool.
: Avoid touching the tie straps and
drive links with the file.
: Rotate the file at regular intervals
while filing to avoid one-sided wear.
: Use a piece of hardwood to remove
burrs from cutting edge.
: Check angles with the filing gauge.
All cutters must be the same length.
If the cutters are not the same length,
they will have different heights. This
makes the chain run roughly and can
cause it to break.
Find the shortest cutter and then file all
other cutters back to the same length.
This can be very time consuming – it is
best to have it done in the workshop on
an electric grinder.
Depth gauge setting
The depth gauge determines the height
at which the cutter enters the wood and
thus the thickness of the chip removed.
Specificed distance or setting between
depth gauge and cutting edge = a:
This setting may be increased by 0.2mm
(0.008") for cutting softwood in mild
weather season – no frost.
Lowering depth gauges
The depth gauge setting is reduced
when the chain is sharpened. Use filing
gauge to check the setting every time
you sharpen the chain and, if necessary,
lower the depth gauge with a flat or
triangular file so that it is level with the
filing gauge.
Round off depth gauges parallel to the
stamped marking.
After sharpening
Clean the chain thoroughly, remove
filings or grinding dust – lubricate the
chain by immersing it in an oil bath.
Before long out-of-service period
Clean the chain with a brush and
immerse it in an oil bath.
Chain pitch Depth gauge
setting “a
Inch (mm) mm (Inch)
1
/
4
(6.35) 0.65 (0.026)
3
/
8
PMN (9.32) 0.45 (0.018)
3
/
8
PM (9.32) 0.65 (0.026)
0.325 (8.25) 0.65 (0.026)
3
/
8
(9.32) 0.65 (0.026)
0.404 (10.26) 0.80 (0.031)
689BA023 KN
a
689BA024 KN
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 009 in the language / languages: English as an attachment in your email.

The manual is 3,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info