608634
6
Zoom out
Zoom in
Previous page
1/11
Next page
6
ENGLISH
GB
Make sure that the parking brake is released when
driving.
4. DRIVE PEDAL (President - Royal)
Pedal which activates the variable transmission.
1. Press down the pedal with the
ball of your foot – the machine
moves forwards.
2. No pressure on pedal – the
machine is stationary.
3. Press downthe pedal with your
heel – the machine reverses.
The speed is regulated with the drive pedal. The
more pressure applied on the pedal, the faster the
machine goes.
5. THROTTLE/CHOKE CONTROL
Control for setting the engine speed and to choke
the engine for cold start.
1. Choke – for starting a cold engine. The
choke is located in the top of the groove.
2. Full throttle – when the machine is in
operation, full throttle should always be
used.
3. Idling.
6. IGNITION LOCK
Ignition lock used to start and stop the engine. Four
positions:
1. Stop position – the engine is short-
circuited. The key can be removed.
2/3. Operating position.
4. Start position – the electric start motor
is activated when the key is turned to the
spring-loaded start position. Once the en-
gine has started, let the key return to oper-
ating position 2/3.
7. GEAR LEVER (Master - Senator -
Comfort)
Lever for selecting one of five forward gears in the
gearbox (1-2-3-4-5), neutral (N), or reverse (R).
The clutch pedal must be depressed when chang-
ing gear.
NOTE! Make sure that the machine is standing
completely still before changing from reverse to
forward gear, or vice versa. If a gear does not en-
gageimmediately, release the clutchand thenpress
it in again. Engage the gear again. Never force a
gear in!
8. POWER TAKE-OFF
Switch for engaging and disengaging the electro-
magneticpowertake-offfordrivingfront-mounted
accessories. Two positions:
1. Press in the right sideof the switch the
power take-off engages. The symbol
lights up.
2. Press in the left part of the switch – the
power take-off disengages.
9. DISENGAGING LEVER
(President - Royal)
Lever for disengaging the variable transmission.
Enablesthemachinetobemovedbyhandwithout
using the engine. Two positions:
1. Lever pressed in – the trans-
mission is engaged for normal
use.
2. Lever pulled out the trans-
mission is disengaged. The ma-
chine can be moved by hand.
The machine must not be towed long distances or
at high speed. This can damage the transmission.
AREAS OF USE
The machine must only be used for the following
tasks with the indicated STIGA original accessories:
1. Mowing
With mower deck 13-2929 (92M) or 13-2930
(107M).
2. Grass clippings and leaves collection
With towed collector 13-1978 (30") or 13-1950
(42").
3. Grass and leaves transport
With dump cart 13-1979 (Standard), 13-1988
(Maxi) or 13-1992 (Combi).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga VILLA ROYAL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga VILLA ROYAL in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info