608637
5
Zoom out
Zoom in
Previous page
1/11
Next page
5
ENGLISH
GB
GENERAL
This symbol means WARNING. Per-
sonalinjuryand/or damageto property
can occur if the instructions are not fol-
lowed carefully.
You must read these operating instruc-
tions and the enclosed pamphlet
“SAFETYINSTRUCTIONS”carefully
before starting the machine.
SYMBOLS
The following symbols are displayed on the ma-
chine to remind you of the care and attention re-
quired when using the machine.
The symbols mean:
Warning!
Read the instruction book and safety man-
ual before using the machine.
Warning!
Beware of objects being flung out. Keep
spectators away.
Warning!
Always use hearing protectors.
Warning!
This machine is not intended to be driven
on public roads.
Warning!
The machine, equipped with original ac-
cessories, must not be driven in any direc-
tion onslopes with a gradient of more than
10°.
Warning!
Risk for burn injuries. Do not touch the si-
lencer.
CONTROLS AND
INSTRUMENTS
Items 1 - 9, see figures 1 - 3.
1. ACCESSORY LIFTER
Pedal for lifting front-mounted accessories to
transport position.
Tolift up the accessory, press down the pedal as far
as it goes. Release the pedal and the accessory lift-
er will now be locked in the lift position.
To lower the accessory, press the pedal to release
the lock. Lower the accessory lifter to working po-
sition by slowly lifting your foot from the pedal.
2A. SERVICE BRAKE/CLUTCH
(Master - Senator - Comfort)
Pedal which combines both the service brake and
clutch. Three positions:
1. Pedalreleased forwarddrive
engaged. The machine starts to
move if a gear is engaged. The
service brake is not activated.
2. Pedal pressedhalfwaydown
front drive disengaged, it is not
possible to change gear. The
service brake is not activated.
3. Pedal pressed fully down –
front drive disengaged The serv-
ice brake is fully activated.
NOTE! Do not regulate the speed by slipping the
clutch. Use a suitable gear instead to obtain the
right speed.
2B. SERVICE BRAKE
(President - Royal)
Pedal which activates the machine’s brake system.
Three positions:
1. Pedalreleased forwarddrive
not engaged.
2. Pedal pressed halfway front
drive disengaged The service
brake is not activated.
3. Pedal pressed fully down –
front drive disengaged The serv-
ice brake is fully activated.
3. PARKING BRAKE
Inhibitor to lock the brake pedal in depressed posi-
tion.
Press down the brake pedal fully. Move
the inhibitor to the right and then release
the brake pedal.
The parking brake is released by pressing the brake
pedal.The spring-loaded inhibitor slides to one side.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga VILLA COMFORT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga VILLA COMFORT in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info