608747
30
Zoom out
Zoom in
Previous page
1/508
Next page
EN
INTENDED USE / UNINTENDED USE
This chain-saw was designed to be used only by a trained 
operator for pruning and cutting the crowns of tall tree
branches, for  cutting bushes, trunks  or wooden beams 
whose diameter depends on the guide bar length. It can
only be used to cut wood. Any other use is unintended 
use. FURTHERMORE, THE MACHINE MUST ONLY BE
USED BY TRAINED PROFESSIONAL TREE MAINTE-
NANCE OPERATORS.
While using the chain-saw, the operator must use proper
personal protective equipment according to the instruc-
tions in the manual and the pictograms on the chain-saw.
Safety devices and references for use and maintenance 
are also an integral part of the instruction manual. Persons
using the chain-saw or doing maintenance must be famil-
iar with the manual.  Only original spare parts or those ap-
proved by the manufacturer (guide bar, saw chain, spark 
plug) and the authorised combinations of guide bar / saw 
chain indicated in the manual can be used.
The user and not the manufacturer is liable for all acci-
dents due to unintended use and/or unauthorised modi-
cations made to the chain-saw.
The chain-saw must only be used outdoors.
Residual risks
Even using the chain-saw according to instructions, there
are always residual risks that cannot be eliminated. The 
following are potential  risks  according  to  the  type  and 
construction of the chain-saw:
–  Contact with exposed teeth of the saw chain (cutting 
risk).
–  Access to the rotating chain (cutting risk).
–  Abrupt, unexpected movement of the guide  bar (cut-
ting risk).
–  Parts of the chain are projected (cutting/injury risk).
Parts of the piece being sawed are projected.
Inhalation of particles of the piece, petrol emissions
4 SYMBOLS / SAFETY REQUIREMENTS
3. SAFETY REQUIREMENTS
EXPLANATORY SYMBOLS ON THE MACHINE (if present)
11) Mixture tank
12) Chain oil tank
13) Engine stop switch
•  The engine starts with 
the switch in the «I»
position.
•  The engine stops 
immediately with the 
switch in the «O» posi-
tion
14) Carburettor adjustments
L  =  low speed mixture 
adjuster
H  =  high speed mixture 
adjuster
T - IDLE - MIN =
idle adjustment
15) Choke
•  a)  cold engine start-
up mode
•  b)  hot engine start-
up mode
•  c)  run
16) Chain brake (the sym-
bol
shows the
direction in
which the brake is 
released)
17) Oil pump regulator
•  If you turn the rod 
with a screwdriver,
following the arrow
toward the «MAX»
position, a greater
quantity of oil will 
ow on the chain;
•  if you turn it toward 
the «MIN» position,
a lesser quantity will 
ow.
18) Direction in which the
chain runs
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga SPR 255 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SPR 255 in the language / languages: All languages as an attachment in your email.

The manual is 9,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info