Manual Stiga SHT 500 (page 20 of 258) (All languages)

608749

Zoom out

Zoom in

1/258

HOW TO READ THE MANUAL

Certain paragraphs in the manual contain particularly

signicant information and are marked with va rious

levels of highlighting with the following meaning:

NOTE

IMPORTANT

These give details or further

information on what has already been said, with the

aim of preventing damage to the machine.

WARNING! Non-observance will result

in the risk of injury to oneself or others.

DANGER! Non-observance will result

in the risk of serious injury or death to oneself or

others.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and

all instructions. Failure to follow the war nings and

instructions may result in electric shock, re and/

or serious injury.

Save all warnings and instructions for future ref-

erence. The term “power tool” in the warnings re fers

to your mains-operated (corded) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b) Do not operate power tools in explosive at-

mospheres, such as in the presence of am-

mable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Ne-

ver modify the plug in any way. Do not use

any adapter plugs with earthed (grounded)

power tools.

Unmodied plugs and matching outlets will re duce

risk of electric shock.

b) Avoid body contact with earthed or grounded

sur faces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

d) Do not use the cord improperly. Never use the

cord for carrying, pulling or unplugging the po-

wer tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or en tangled

cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Using

a cord suitable for outdoor use reduces the risk of

electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Using an RCD reduces

the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or medi-

cation. A moment of inattention while operating

power tools may result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the o-position before connecting

to power source, picking up or carrying the

tool. Carrying power tools with your nger on the

switch or energising power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

po wer tool for your application. The correct

po wer tool will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and o. Any power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

c) Disconnect the plug from the power source

before making any adjustments, changing

accessories, or storing power tools. Such pre-

ventive safety measures reduce the risk of starting

18 SAFETY WARNINGS

3. SAFETY WARNINGS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SHT 500 in the language / languages: All languages as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiga SHT 500 Manual

Product: