733496
23
Zoom out
Zoom in
Previous page
1/357
Next page
EN
IDENTIFICATION OF MAIN COMPONENTS / SYMBOLS 3
Maximum noise and vibration levels [1] Model
A 180 E
C 1.8 E C 1.8 ET
SE 1814
SE 1814 Q
SE 2014
SE 2014 Q
A 200 E XC 120 Q
CP 2.0 Q
C 2.0 E C 2.0 ET
SE 2016
SE 2016 Q
A 220 EQ
C 2.2 E C 2.2 ET
SE 2216
SE 2216 Q
Operator ear noise pressure level (EN ISO 22868) dB(A) 94.3 95.1 95.1 96.1
Measurement uncertainty (2006/42/EC - EN 27574) dB(A) 3 3 3 3
Measured acoustic output level (EN ISO 22868) dB(A) 92.8 93.3 93.3 94.1
Measurement uncertainty (2006/42/EC - EN 27574) dB(A) 3 3 3 3
Vibration level (ISO 22867) m/sec24.686 4.916 4.916 5.285
Measurement uncertainty (2006/42/EC - EN 12096) m/sec21.5 1.5 1.5 1.5
TECHNICAL SPECIFICATIONS
Voltage V~230 - 240 230 - 240 230 - 240 230 - 240
Power frequency Hz 50 50 50 50
Overload protection A 16 16 16 16
Motor power W 1800 2000 2000 2200
Bar length cm 35 35 40 40
Cutting length cm 33.5 33.5 38.5 38.5
Chain speed m/sec 14 14 14 14
Weight kg 5.00 5.05 5.30 5.42
Oil ml 130 130 130 130
1) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise
level of 85 dB (A) or higher. Wear safety glasses
and hearing protection.
2) Warning!
3) Read the instruction manual before using the
machine.
4) Do not leave the machine in the rain (or in damp
conditions).
11) Direction in which the chain is mounted
12) Chain brake
13) Direction in which the chain runs
14) Chain oil tank
15) Chain tension
5) Wear strong working gloves.
6) Unplug the chain-saw immediately if the cable
(or extension lead) is cut or damaged.
7) Beware of kickback! Kickback is the rapid and
uncontrollable backward motion of the machine in
the direction of the operator.
8) Hold the machine fast with both hands to con-
trol the machine and reduce the risk of kickback.
EXPLANATORY SYMBOLS
ON THE MACHINE
(if present)
2. SYMBOLS
21 73 4 6 85
11 12 13 14 15
[1]
Notice:
The vibration value indicated was determined with a standardized tool and can be used to make comparisons with other electric equipment
as well as temporary estimates of the load through the vibrations.
WARNING!
The vibration value may vary according to the usage of the machine and its fitted equipment, and be higher than the one indicated. Safety meas-
ures must be established to protect the user and must be based on the load estimate generated by the vibrations in real usage conditions. In
this regard, all the operational cycle phases must be taken into consideration, such as switching off or idle running.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga SE1814Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SE1814Q in the language / languages: All languages as an attachment in your email.

The manual is 6,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info