608725

Stiga SB 33 Manual

112
Zoom out
Zoom in
Previous page
1/408
Next page
The belt (1) must go over the left shoulder towards 
the right hip. 
• Double belt models
The belt (2) must be worn with:
–   the machine’s support and snap-hook coupling on 
the right side (2.1);
–   the release in front (2.2);
–   the belts cross-over on the operator’s back (2.3);
–   the buckle properly fastened on the left side (2.4).
The belts must be tensioned so that the load is evenly 
distributed on the shoulders.
USING THE MACHINE
WARNING!
When working, the ma chine
must always be rmly held in both hands, kee
-
ping the power unit on the right of the body and
the cutting group below the line of the belt.
WARNING!
Stop the engine immedia-
tely if the blade stops during sawing. Always
beware of a kickback, which could occur if a
blade encounters a solid object (logs, roots,
branches, stones, etc.). Do not touch the ground
with the blade. Kickbacks cause blade recoils
that are dicult to control, so as to cause loss
of control of the machine, compromise operator
safety and cause damage to the machine itself.
Before tackling a mowing job  for  the  rst  time  it  is 
advisable to gain the necessary  familiarity with the 
machine and the  most suitable cutting techniques, 
nding out how to wear the webbing correctly, rmly 
gripping  the  machine  and  making  the  movements 
required by the job.
• Choosing the cutting device
Choose the most suitable cutting device for the job 
to be done, according to these general indications:
– the  3-point  blade  is  suitable  for  cutting  brush
-
wood and small shrubs up to 2 cm in diameter;
–  the 4-point bladeis is suitable for cutting resistant 
grass over large surfaces; 
–  the cutting line head can eliminate tall grass and 
non-woody vegetation near fences, walls, founda
-
tions, pavements, around trees, etc. or  to  com-
pletely clean a particular area of the garden;
To respect people and the environment:
–   Try not to cause any disturbance.
–   Scrupulously  comply  with  local  regulations 
and provisions for the disposal of waste ma
-
terials after sawing.
–   Scrupulously  comply  with  local  regulations 
and provisions for the disposal of oils, petrol, 
damaged parts or any elements which have a 
strong impact on the environment.
WARNING!
Prolonged exposure to vi
brations can cause injuries and neurovascular
disorders (also called “Renaud’s syndrome” or
“white hand”), especially to people suering
from circulation disorders. The symptoms can
regard the hands, wrists and ngers and are
shown through loss of sensitivity, torpor,
itching, pain and discolouring of or structural
changes to the skin. These eects can be wor
-
sened by low ambient temperatures and/or by
gripping the handgrips excessively tightly. If the
symptoms occur, the length of time the machine
is used must be reduced and a doctor consulted.
WARNING!
Always wear suitable clo-
thing when using the machine. Your dealer can
provide you with all the information on the most
suitable accident-prevention devices to guaran
-
tee your safety.
USING THE WEBBING (Fig. 10)
WARNING!
The machine must al ways
be used connected to the webbing worn cor
-
rectly. Frequently check the eciency of the
quick release mechanism used to quickly free
the machine from the belts in case of danger.
The webbing must be put on before connecting the 
machine to the special coupling and the belts must 
be adjusted to suit the operator’s height and stature.
If the machine has more than one coupling hole, use 
the most favourable point for keeping the machine 
balanced when working.
Always use webbing suited to the weight of the ma
-
chine and the cutting device used
– the single or double belt models can be used for 
machines weighing less than 7.5 kg tted with 
the cutting line head or 3 or 4-point blades;
–   the double belt model must be used for machines 
weighing more than 7.5 kg.
• Single belt “MONO” models
EN
110 USING THE MACHINE
  7.  USING THE MACHINE
… 112 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga SB 33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SB 33 in the language / languages: All languages as an attachment in your email.

The manual is 7,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info