575791
151
Zoom out
Zoom in
Previous page
1/153
Next page
Edition Chapter Refers to model Page Chapter
2000-03-31 9
Workshop Manual Stiga Park
9.5 Replacement of pul-
leys
There are three different types of pulleys on
the unit. Firstly the pulleys on the interme-
diate shaft A. These are journalled with two
ball bearings. To remove these pulleys from
the shaft the attachment plate’s four screws
must be removed, since the shaft is secu-
red with a nut on the underside of the plate.
The two return pulleys B and C are journal-
led with one ball bearing each. These shaft
are also secured with a nut from the un-
derside.
The large pulleys D and E are mounted di-
rectly on the blade shafts.
Warning!
To avoid breakdowns it is impor-
tant that the nut on the blade shaft is
tightened to the correct torque.
The nut must always be tightened to a
torque of 40Nm.
Do not overtighten the nut since this will
damage the thread
Dismantling of pulley on blade
shaft
Preparations
Dismantling of deck belt, see section 9.4.
Procedure
Warning!
The blades are sharp. Always
wear gloves when working with the bla-
des to avoid injury.
1. Release the nut on the blade shaft and
remove the pulley.
Replacement of belt
pulleys
All 9.5
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Pro 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Pro 18 in the language / languages: English as an attachment in your email.

The manual is 6,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info