575791
5
Zoom out
Zoom in
Previous page
1/153
Next page
Edition Chapter Refers to model Page Chapter
2000-04-06 5
Workshop Manual Stiga Park
Do as follows
1. Remove the seat that lies under the
machine.
2. Cut off the plastic strap round the
wheels.
3. Roll the machine off the pallet.
Assembly of steering wheel
1. To avoid tensions in the steering wheel
bearing it is important to use the correct
shims during assembly. Put the steering
wheel on first without tapping in the ten-
sion pin.
2. Press up the steering column as far as
possible by pressing on the chain
sprocket under the floor plate.
3. Check that the hole in the steering
column and the hole in the steering
wheel coin-cide, or whether it is neces-
sary to use shims to get the holes in
line.
4. Lift off the steering wheel, insert one or
more shims, replace the steering wheel
again and then tap in the spring pin.
The machine is delivered with two
shims, one with a thickness of 0.5 mm
and one with a thickness of 1.0 mm.
Also make sure that the logo on the ste-
ering wheel is in the correct position.
Assembly of seat
1. Fit the seat switch with the two screws
(Senator and President only).
2. Connect the cables to the seat switch.
3. The switch should be fitted with the con-
necting pins facing towards the front
edge of the seat.
4. Place the seat in position on the seat
bracket. Fit the two knobs in the front
edge of the seat. Do not forget the
washers.
5. Fit the two screws in the rear edge of
the seat.
Assembly on delivery All 1.2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Pro 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Pro 18 in the language / languages: English as an attachment in your email.

The manual is 6,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info