575790
149
Zoom out
Zoom in
Previous page
1/153
Next page
Edition Chapter Refers to model Page Chapter
2000-03-31 7
Workshop Manual Stiga Park
9.4 Replacement of deck
belt
Dismantling of deck belt
Preparations
Dismantling of belt, articulation point -
deck, see section 7.3.
1. Release the nuts 1, 2 and 3.
Note!
The nuts should only be released, not
removed.
2. Release the tension of the belt by remo-
ving the nut A.
Screw in the lock nut B approx. 30 mm
on the adjusting screw.
Warning!
The belt must not be severely
bent or forced over an edge, since this
will damage the glass fibre cord in the
belt.
3. Move the clamping cradle as far to the
right as possible (A) and carefully work
the belt off the return pulley B.
Note!
Always work off and on the belt at the
upper return pulley, since this pulley has
lower flanges than the large pulleys.
4. Pull the clamping cradle as for to the left
as possible and remove the belt.
Replacement of deck
belt
All 9.4
149


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Pro 16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Pro 16 in the language / languages: English as an attachment in your email.

The manual is 6,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info