575789
6
Zoom out
Zoom in
Previous page
1/153
Next page
Edition Chapter Refers to model Page Chapter
2000-04-06 6
Workshop Manual Stiga Park
Arm rest (Pro 20)
The arm rest and the parts for its assembly
are delivered in a separate box.
1. Screw tight the left and right supports on
the seat by using the six enclosed
screws.
2. Fit the height adjusting screw in the arm
rest.
3. Fit the arm rests in the supports. A spa-
cer should be placed on each side of
the support.
4. Tighten the screws so that the parts do
not rattle, but not tight enough to pre-
vent the arm rest from being turned up.
Tyres
The air pressure in the tyres is of critical im-
portance for the performance and handling
of the machine. The correct air pressure for
mowing is 0.6 bar (9 psi) in the front tyres,
and 0.4 bar (6 psi) in the rear tyres.
When using heavy accessories, e.g. snow
thrower, it may be necessary to increase
the pressure somewhat. However, the
maximum permitted pressure is always
0.8 bar (12 psi).
Towing plate
Fitting according to customer require-
ments.
Engine oil
Check the oil level in the engine and top up
if necessary.
Test driving
Drive the machine for a few minutes. Test
all the functions. Pay special attention to
the safety functions. If the machine is to be
delivered with mower deck or other acces-
sories, fit these before test driving the
machine.
Hydrogear oil
Check the oil level in the hydrogears ex-
pansion tank after test driving, and top up if
necessary. (Only applies to Park Pro).
Assembly on delivery All 1.2
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga President at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga President in the language / languages: English as an attachment in your email.

The manual is 6,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stiga President

Stiga President User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info