Manual Stiga PARK COMFORT (page 8 of 16) (English)

575797

Zoom out

Zoom in

1/16

ENGLISH

2. Lever in backward position - power

take-off engaged.

11. POWER TAKE-OFF (Pro20)

Switch for engaging/disengaging the electromag-

netic power take-off for operating front-mounted

accessories. Two positions:

1. Press the front part of the switch – the

power take-off is engaged. The symbol

will light up.

2. Press the rear part of the switch – the

power take-off is disengaged.

12. DIFFERENTIAL INHIBITOR

(Pro16 - Pro20)

Lever for engaging the differential inhibitor. This

improves the towing capacity by locking the rear

wheels so that both wheels drive simultaneously.

Two positions:

1. Forward position – the differential in-

hibitor is not engaged. For normal opera-

tion.

2. Lever in backward position - differen-

tial inhibitor engaged. Works for both for-

ward and reverse drive.

The differential inhibitor is of greatest use when

the rear wheels are unevenly loaded. For example

when turning sharp corners where the inner rear

wheel bears a lesser load.

When driving during the winter on slippery surfac-

es, the drive capacity is improved if snow chains

are not used.

When the differential inhibitor is engaged, the

steering is heavy. Avoid turning the steering

wheel!

13. HOUR COUNTER

Indicates the number of working hours. Only

works when the engine is running.

14. CRUISE CONTROL

(Royal - Pro16 - Pro20)

A switch for activating the cruise control. The

cruise control allows the drive pedal (5) to be

locked in the desired position.

1. Press down the drive pedal until the de-

sired speed is obtained. Then press the

front part of the switch to activate the

cruise control. The symbol will light up.

2. Disengage the cruise control by braking

or pressing the rear part of the switch.

15. CUTTING HEIGHT ADJUSTMENT

(Royal - Pro16 - Pro20)

The machine is equipped with a control for using

the cutting deck with electrical cutting height ad-

justment (available as an accessory).

The switch is used to adjust the cutting

height in continuously variable positions.

The contact used for connecting the cutting deck is

mounted on the right side, in front of the front

wheel (fig. 2).

16. REAR RAKE (Pro20)

The machine is fitted with a control for electrical

adjustment of a rear rake (available as an accesso-

ry).

The switch is used to raise and lower the

rear rake.

Cables for connecting the rear rake are found at the

rear of the machine, to the left of the upper side of

the bumper. (Pro16 is prepared for a rear rake, ca-

bles routed).

17. SAND SPREADER (Pro20)

The machine has been designed for electrical ad-

justment of a sand spreader (available as an acces-

sory).

The switch is used to start and stop the

spreader.

The contact for connecting the sand spreader is

found at the rear of the machine, to the left of the

upper side of the bumper. (Pro16 is prepared for a

sand spreader, cables routed).

18. DISENGAGING LEVER

A lever for disengaging the variable transmission.

Enables the machine to be moved by hand without

the help of the engine. Two positions:

12V

how do i change the tensioner spring on the steering for a stiga park. Does the deck have to b e removed to gain
access ? Submitted on 10-7-2022 at 14:39
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiga PARK COMFORT in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stiga PARK COMFORT

Stiga PARK COMFORT User Manual - Dutch - 17 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiga PARK COMFORT Manual

Product: