564038
21
Zoom out
Zoom in
Previous page
1/32
Next page
21
User’s manual
EN
REMOTE CONTROL: (only for some versions, see “Technical Speci cations).
See the instructions on the remote control / console for the pairing procedure.
SOUND: Allows disabling the acoustic signal when the robot is in the charging station.
BACK TO RECHARGE: Allows selecting the method for the robot’s return to the charging
station.
1. “Follow wire”. The robot returns to the charging station by positioning the wheels on
either side of the perimeter wire.
2. “V-METER”. The robot runs along the perimeter wire at an indicative distance ranging
from a few centimetres to one meter (3.2 '), touching it every now and again in the
curved sections until it recognises the “Recall” to the charging station. Refer to the
“Installation” chapter.
DATE: Function for setting the date.
TIME: Function for setting solar or daylight saving time.
ENTER
DATE DD/MM/YY
MON 00 / 00 / 00
WORK SCHEDULES – PROGRAMMING MODE
WORK SCHEDULE 1: Function for setting the rst time of the robot’s working day.
The cursor automatically positions itself in the area under the rst time (e.g. 10:00am to
1:00pm). Set the time for the start and end of the work.
Setting the time at “00:00 – 00:00” means that the robot will not work during Work Schedule
1. Once entered. If the entered time is wrong such as if the time overlaps with the working
time 2 or if the starting time is after the end time, the robot beeps and resets the set value.
WORK SCHEDULE 2: Function for setting the second time of the robot’s working day.
Important
If it is necessary to set secondary areas, then it is preferable to program
both work schedules in order to increase the mowing frequency of the
area.
ENTER
WORKING TIME
00 : 00 - 00 : 00
The setting of the time is essential for the robot’s proper functioning. Many parameters in uence the setting of the work schedules, such as the
number of secondary areas, the number and the power of batteries of the robot, complexity of the lawn, type of grass, etc. Generally, the working
hours must be increased slightly when mowing gardens with secondary areas, with lots of obstacles and complicated areas. Below is a table with
the indicative times for con guring the robot on rst use.
NB. Set all the weekdays at “1” – “Work Days.”
Model m² (ft²) Time 1 Time 2
400BA0 5000 (53800) 13:00 18:00
400BA0 8000 (86080) 9:30 13:00 17:00 20:30
400BA0 10000 (107600)
08:00 22:00
WEEK: Function for programming robot work schedule during the week.
A personalised work schedule can be disabled, enabled or set for every day of the week.
Important
To get the best out of the robot, it is recommended to program the robot
to work every day.
ENTER
WORKING DAYS
M ON
T ON
W ON
T ON
F ON
S PERSONALISED
S OFF
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga AUTOCLIP 920 S - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga AUTOCLIP 920 S - 2014 in the language / languages: English as an attachment in your email.

The manual is 8,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stiga AUTOCLIP 920 S - 2014

Stiga AUTOCLIP 920 S - 2014 User Manual - German - 32 pages

Stiga AUTOCLIP 920 S - 2014 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info