564038
13
Zoom out
Zoom in
Previous page
1/32
Next page
13
User’s manual
EN
4. If there is a pavement or driveway inside or outside the work area, which is at the same level of the lawn, lay the perimeter wire at a distance
of 5 cm (1.96 ") from the edge of the pavement. The robot will come out slightly from the lawn and all the grass will be mowed. If the pavement
is made of metal or if there is a metal manhole cover, shower plate or electrical wires, lay the perimeter wire at least 30 cm (11.81 ") from the
metal object in order to prevent malfunction of the robot and disturbances on the perimeter wire.
Important
The illustration shows an example of the elements inside and on the perimeter of the work area and the distances to follow
for the correct laying of the perimeter wire. Mark the boundary of elements in iron or other metals (drain covers, electric
connections, etc.) to prevent any interferences to the signal of the perimeter wire.
5 cm
1,97 “
30 cm
11,81 “
30 cm
11,81 “
30 cm
11,81 “
If an obstacle is present inside or outside the work area, such as a kerb or wall, lay the perimeter wire at least 40 cm (15,75 ") from the obstacle.
Increase the distance between the perimeter wire and the obstacle by at least 50 cm (19.70 ") if you want to avoid the robot from bumping into
the obstacle. Any grass close to the edge and outside the de ned work area can be cut with a grass trimmer or brushcutter.
40 cm.
/ 15,75 "
40 cm.
/ 15,75 "
40 cm.
/ 15,75 "
40 cm.
/ 15,75 "
If a ower bed, hedge, plant with protruding roots, small ditch of 2-3 cm or small kerb of 2-3 cm is present inside or outside the work area, lay the
perimeter wire at least 40 cm (15,75 ") from the obstacle to prevent damage being done to the robot or the obstacle.
Any grass present inside the work area can be cut and nished with a grass trimmer or brushcutter.
protruding roots
40 cm.
/ 15,75 ”
40 cm.
/ 15,75 ”
40 cm.
/ 15,75 ”
40 cm.
/ 15,75 ”
40 cm.
/ 15,75 ”
40 cm.
/ 15,75 "
40 cm.
/ 15,75 "
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga AUTOCLIP 920 S - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga AUTOCLIP 920 S - 2014 in the language / languages: English as an attachment in your email.

The manual is 8,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stiga AUTOCLIP 920 S - 2014

Stiga AUTOCLIP 920 S - 2014 User Manual - German - 32 pages

Stiga AUTOCLIP 920 S - 2014 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info