564042
107
Zoom out
Zoom in
Previous page
1/788
Next page
49
User’s manual
EN
TROUBLESHOOTING
TROUBLESHOOTING GUIDE
The information below is designed to help identify and correct any faults and/or malfunctions
which may occur during operation. Some failures can be  xed by the user, while others require
speci c technical skills or special abilities and therefore must only be  xed by quali ed per-
sonnel with certi ed experience gained in the speci c  eld of intervention.
Problem
Cause
Remedies
The antitheft alarm
continues to operate
Alarm enabled
Disable the alarm
(see “Programming Mode”)
The antitheft alarm
does not work
Alarm disabled Enable the alarm (see “Programming Mode”)
The robot is very noisy
Cutting blade
damaged
Replace the blade with a new one
(see “Blade Replacement”)
Cutting blade fouled
(tape, cords, plastic
fragments, etc.)
Stop the robot safely (see “Robot Safety
Stop”). Unclog the blade
Use protective gloves to prevent injury.
The robot was star-
ted in the presence
of obstacles (fallen
branches, forgotten
objects, etc.)
Stop the robot safely
(see “Robot Safety Stop”)
Remove the obstacle and restart the robot
(see “Start-up and manual stopping of the
robot (in closed areas)”)
Electric motor failure
Have the motor replaced or repaired by your
nearest authorised service centre
Grass too high
Increase the cutting height
(see “Adjustment of cutting height”)
Carry out a preliminary cutting of the area
with a normal lawnmower
The robot does
not position itself
correctly inside the
charging station
Incorrect positioning
of the perimeter wire
or power cord of the
charging station
Check the connection of the charging station
(see “Installation of the charging station and
power supply-transmitter unit”)
Collapsing of ground
next to the charging
station
Position the charging station on a  at
and stable surface
(see “Planning of plant installation”)
Warning - Caution
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga AUTOCLIP 720 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga AUTOCLIP 720 S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 96,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info