564042

Stiga AUTOCLIP 720 S Manual

98
Zoom out
Zoom in
Previous page
1/788
Next page
40
User’s manual
EN
INITIAL STARTUP – AUTOMATIC MODE
The start-up of the automatic cycle is
executed on the initial start-up or after a
period of inactivity.
1. Check that the height of the lawn surface
to mow is compatible with the correct
functioning of the robot (see “Technical
Speci cations”).
2. Adjust the cutting height as desired (see
“Adjustment of Cutting Height).
3. Check that the work area has been
correctly marked and that there are no
impediments to the regular functioning
of the robot as indicated in the section
“Preparation and Marking the Boundaries
of the Work Areas” and following sections.
"ON" KEY (A)
"START/PAUSE" KEY (B)
"OFF/STOP" KEY (C)
4. Position the robot inside the charging station.
5. Press the ON key and wait a few seconds for the robot to turn on completely.
6. If starting the robot for the  rst time, it is necessary to program the settings. However, if
starting the robot after a long period of inactivity, check that the programmed functions
correspond to the actual state of the lawn to mow (e.g. addition of a pool, plants, etc.) (see
“Programming Mode”).
7. After a few seconds, the message “CHARGING” will appear on the display.
8. The robot starts to mow the lawn according to the methods programmed.
ROBOT SAFETY STOP
During use, it may be necessary to stop the robot. In normal conditions, the robot can be
stopped with the “OFF/STOP” key. In case of danger or when performing any maintenance,
it is necessary to safely stop the robot in order to prevent the blade from accidently starting.
Press the “STOP/Emergency” key (A) to stop the robot. Press the “STOP/Emergency” key (A)
again to restart the robot.
The robot safety stop is necessary
when carrying out any maintenance and
repairs (for example, replacement and/or
recharging of the battery, replacement of
the blade, cleaning operations, etc.).
"OFF/STOP" KEY (A)
… 98 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga AUTOCLIP 720 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga AUTOCLIP 720 S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 96,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info