564042
70
Zoom out
Zoom in
Previous page
1/788
Next page
12
User’s manual
EN
operations provided for by the Manufacturer. Proper maintenance will allow obtaining the best
performances and longer operating times.
Before carrying out any maintenance and adjustments disconnect the electric power supply.
The user must ensure that all the necessary safety conditions are in place, especially when
working on the lower part of the lawn mower, and must follow the Manufacturer’s procedures
and instructions.
Use the personal protection devices prescribed for by the Manufacturer, in particular, always
wear protective gloves when working on the cutting blade.
Before replacing the batteries, always remove the blade.
Make sure the air openings of the power supply unit are free and clear of residuals.
In order to not irreversibly damage the electric and electronic parts, do not wash the robot with
high-pressurised water and do not immerse it in water, partially or completely, since it is not
watertight.
• Only quali ed persons, having the necessary technical expertise and skill, should attempt to work
on or repair this robot. Failure to observe these requirements could result in serious injury.
Any work to be performed on the charging station must be carried out with the plug of the
power cord disconnected.
• Replace any worn or deteriorated parts with original spare parts to ensure proper functionality
and safety.
The robot cannot be used without the upper cover; if the mechanical parts of the robot are
damaged, they must be replaced.
• Any routine or extraordinary maintenance (e.g. battery replacement) must be performed by an
authorised service centre.
The Manufacturer shall not be held liable if non-original spare parts are used.
Never use and recharge the robot in explosive and/or  ammable environments.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga AUTOCLIP 720 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga AUTOCLIP 720 S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 96,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info