General information. ...................................................................................................................................................................2
Purpose of the manual. ...............................................................................................................................................................2
Identifi cation of manufacturer and equipment. ............................................................................................................................2
General description of the appliance...........................................................................................................................................6
Main parts. ..................................................................................................................................................................................7
Packing and unpacking. ..............................................................................................................................................................8
Planning of system installation. ...................................................................................................................................................8
Setting up of the perimeter wire. .................................................................................................................................................9
Re-entry method to the charging station. ..................................................................................................................................10
Setup of the robot’s quick re-entry to the charging station. .......................................................................................................10
Preparation and marking the boundaries of the work areas. .....................................................................................................11
Installation of perimeter wire. ....................................................................................................................................................14
Installation of the charging station and power supply unit.........................................................................................................16
Battery charging on fi rst use. ....................................................................................................................................................17
Adjustment of cutting height. .....................................................................................................................................................17
Use and operation. ....................................................................................................................................................................18
Recommendations for use. .......................................................................................................................................................18
Description of robot commands. ...............................................................................................................................................18
Menu access. ............................................................................................................................................................................18
Automatic return to the charging station. ..................................................................................................................................24
Use of the robot in closed areas with no charging station.........................................................................................................24
Starting the robot without the perimeter wire. ...........................................................................................................................25
Visualising the display during the work phase. .........................................................................................................................26
Prolonged inactivity and restarting. ...........................................................................................................................................26
Battery charging after prolonged inactivity. ...............................................................................................................................27
Part replacement. ......................................................................................................................................................................31
Recommendations for replacing parts. .....................................................................................................................................31
Declaration of conformity. ........................................................................................................................................................32
Reproduction, even partial, of this document without written permission by the manufacturer is strictly forbidden. The manufacturer assumes a policy of continual improvement and reserves the right to modify this document without
prior notice on condition that the changes do not constitute health and safety risks.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Stiga Autoclip 527 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Stiga Autoclip 527 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.
The manual is 115,82 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
