516571

Stiga Autoclip 325 Manual

26
Zoom out
Zoom in
Previous page
1/578
Next page
24
User’s manual
EN
ROBOT SAFETY STOP
During use, it may be necessary to stop the robot. In normal conditions, the robot can be stopped with the “OFF/STOP” key. In case of danger
or when performing any maintenance, it is necessary to stop the robot in safe conditions in order to prevent the blade from accidently starting.
Press the “STOP” key to stop the robot. Press the “STOP” key again to restart the robot.
Important
The robot safety stop is necessary during maintenance
and repairs (for example, replacement and/or recharging
of the battery, blade replacement, cleaning operations,
etc.).
ENTER
“STOP” KEY (A)
AUTOMATIC RETURN TO THE CHARGING STATION
The robot stops the work cycle if the following conditions are verifi ed.
-
End of working time: At the end of the working time, the robot automatically returns to the charging station and starts operating again
according to what has been programmed (see “Programming Mode”).
-
Rain: In case of rain, the robot automatically returns to the charging station and starts operating again according to what has been
programmed (see “Programming Mode”).
-
Battery to be charged: The robot automatically returns to the charging station.
-
Lawn mowed (only for some versions, see “Technical Specifi cations): If the sensor detects that the lawn has already been mowed, it
automatically returns to the charging station and starts operating again according to what has been programmed (see “Programming Mode”).
USE OF THE ROBOT IN CLOSED AREAS WITH NO CHARGING STATION
The start-up of the robot in “closed area” mode is for mowing closed areas
which are delimited by the perimeter wire and which have no charging
station.
Warning – Caution
Carry the robot using the handle provided. Do not grab the
robot by the body and always use the handle provided.
Position the robot inside the work area at a minimum distance of 100 cm
(39.37 ") from the perimeter wire and from any other obstacle.
min. 100 cm
(39,37 ")
min. 100 cm
(39,37 ")
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Autoclip 325 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Autoclip 325 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 112,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info