516583

Stiga Autoclip 127 Manual

17
Zoom out
Zoom in
Previous page
1/578
Next page
15
User’s manual
EN
Ground wire
Cut the grass as low as possible with a traditional lawnmower ortrimmer
along the entire path where the cable will be laid.This will make it easier
to lay the wire in contact with the ground, and to prevent it from being cut
by the cutting blade, and then having to join the two ends together as
described below.
1. Position the wire in a clockwise direction along the entire track and
secure it with the pegs supplied (distance of 100÷200 cm (39.37÷78.74 ")
between each peg).
-
When laying the perimeter wire, follow the installation direction
around the fl owerbeds, i.e. a counter-clockwise direction.
-
In straight stretches, secure the wire so that it is taut and remains
fl at against the ground.
-
In curved sections, secure the wire so that it is not twisted, but
curves nicely (radius of 20 cm).
NO
wire fastening pegs perimeter wire
Buried wire
1. Dig the ground in a regular and symmetrical manner with respect to the
line traced on the ground.
2. Position the wire in a clockwise direction along the track at a depth of a
couple of centimetres (around 2÷3 cm (0.7874÷ 1.1811 ")). Do not bury
the wire deeper than 5 cm, so as not to reduce the quality and intensity
of the signal picked up by the robot.
3. During the laying of the wire, it may be necessary to secure it in some
points with the pegs provided in order to hold it in place when covering
with the ground.
4. Cover all the wire with soil and make sure it remains taut in the ground.
PRIMARY AREA
CLOSED AREA
corridor
< 70 cm (27,56 ")
35 cm
(13,78 ")
Max 1 cm
(0,40 ")
NO
Joining of the perimeter wire
Important
A buried wire or a wire laid on the ground can be joined to
other wires having the same characteristics (see fi gure).
When joining the two wires, make sure to use self-sticking
tape (for example, 3M Scotch 23). Do not use insulating
tape or any other type of joining devices (wire terminals,
clamps, etc.).
1
3 4
2
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Autoclip 127 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Autoclip 127 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 112,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info