516583
6
Zoom out
Zoom in
Previous page
1/578
Next page
4
User’s manual
EN
SAFETY DEVICES
1. Bumpers
The bumper sensor is activated if the robot strikes a solid object greater than 10 cm (3.94 in.) in height, which stops the movement in that
direction and moves backwards to avoid the obstacle.
2. Inclinometer
If the robot works on a slope which is steeper than the maximum limit, or tips over, the robot will stop the cutting blade.
3. Emergency stop switch
Located on the control panel with the word STOP larger than the other commands on the keypad. Pressing this button at any time during
operation will immediately stop the movement of the lawnmower robot and the rotation of the blade will stop within 2 seconds.
4. Over-current protection
Each motor (blade and wheels) is monitored continuously during operation for any situation that may cause them to overheat. If this occurs
in the wheel motor, the robot will attempt to move in the opposite direction. If the over-current persists, the robot will stop and signal an error.
If the cutting blade motor overheats, there are two intervention ranges. If the parameters fall within the rst range, the robot will perform the
manoeuvres to unblock the cutting blade. If the over-current is below the protection range, the robot will stop and signal a motor error.
5. No sensor signal
If there is no signal on the perimeter cable, the robot will automatically stop.
6. Lifting sensor
If the robot is lifted from the ground by the central handle, the cutting blade will stop rotating.
SAFETY SIGNALS
Attention! Do not clean or wash
the robot with water.
Carefully read the user
instructions and ensure that you
fully understand them before
using the robot.
Carefully follow the warning
and safety recommendations
contained in this manual to
guarantee the safety and
ef ciency of the robot.
Keep hands and feet away from
the cutting blade. Never place
your hands or feet under the body
or close to the robot when it is in
operation.
This product is password
protected. Keep the code in a safe
place.
Keep children, pets and other
people a safe distance away when
the robot is in operation.
This product complies with the
current CE directives.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Autoclip 127 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Autoclip 127 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 112,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info