Manual Stiga 740 WX - P 901 CH (page 155 of 588) (All languages)

608664

155

Zoom out

Zoom in

1/588

Do not change the engine governor set-

tings or overspeed the engine.

Do not touch engine components which

get hot during use. Burns hazard.

Disengage the cutting means or the

PTO, set the engine to the idle position,

stop the engine and remove the key

(make sure that all moving parts have

come to a complete stop):

a. whenever you leave the machine

unattended or leave the driver'r seat.

b. before removing the jamming cause

or unclogging the collector channel;

c. before checking, cleaning or working

on machine;

d. after striking a foreign object. Inspect

the machine for damage and make

repairs before restarting and opera-

ting the machine;

Disengage the cutting means or the

PTO and stop the engine (make sure

that all moving parts have come to a

complete stop):

a. Before refuelling;

b. Every time you remove the grass col-

lector sack or put it back on;

c. adjusting the cutting height, assuming

this operation cannot be done from

the driver’s seat.

Disengage the cutting means or the

PTO during transport or whenever the

machine is not being used.

Reduce the throttle setting before stop-



conclusion of mowing, following the in-

structions in the manual.

Take care with multiple cutting means

as one rotating cutting mean may cau-

se other cutting means to rotate.

WARNING - In the event of failures or

accidents when working with the ma-

chine, stop the engine immediately

and move the machine away to avoid

causing further damage; in the event of





which are most appropriate to deal with

the situation and contact a health care

facility for the necessary treatment. Ca-

refully remove any debris which could



animals if ignored.

CAUTION! The noise and vibration le-

vels shown in these instructions are the



The use of an unbalanced cutting me-



or the absence of maintenance have

     -

sions and vibrations. Consequently, it

is necessary to take preventive steps to

eliminate possible damage due to high

levels of noise and stress from vibra-

tion. Maintain the machine well, wear

ear protection devices, and take breaks

while working.

3.4 MAINTENANCE AND STORAGE

CAUTION! - Before cleaning or doing

maintenance work, take out the ignition

key and read the relevant instructions.

Wear adequate clothing and work glo-

ves whenever your hands are at risk.

CAUTION! - Never use the machine with

worn or damaged parts. Faulty or worn-

out parts must always be replaced and

never repaired. Only use original spa-

re parts: The use or non-original and/

   -

mise the safety of the machine, may

    

for which the Manufacturer is under no

circumstance liable or responsible.

Any regulations and maintenance ope-

rations not described herein must be

carried out by your Dealer or Authori-

zed Service Centre, which have the ne-

cessary knowledge and equipment to

ensure that the work is carried out cor-

rectly, maintaining the correct degree of

safety and the original operating condi-



or maintenance operations carried out

by people not having the necessary

knowledge will nullify the warranty and

-

bility.

• After each use of the machine, remove the key

and check for any damage.

• Keep all nuts, bolts and screws tight to be sure

ENGLISH

(Translation of the Original Instructions)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiga 740 WX - P 901 CH in the language / languages: All languages as an attachment in your email.

The manual is 110,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiga 740 WX - P 901 CH Manual

Product: