608664

Stiga 740 WX - P 901 CH Manual

150
Zoom out
Zoom in
Previous page
1/588
Next page
1 INTRODUCTION
Read the instruction manual carefully
before starting the machine.
1.1 STRUCTURE OF THE MANUAL
This manual is made up of the cover, the table of
contents, a section containing all the gures and
explanatory text.
Contents are divided into chapters, headings and
subheadings.
This manual contains a number of tables relative
to the dierent engines (if scheduled).
To facilitate reading, highlight the data which
applies to your machine/engine.
Figures
The gures in these instructions for use are num-
bered 1, 2, 3, etc.
Components shown in the gures are marked A,
B, C, etc.
A reference to a gure is written (2).
A reference to component A in gure 2 is written
(2:A).
Headings
The headings in these instructions for use are
numbered in accordance with the following
example:
2.3 INTENDED USE” is a subheading to “2 GET-
TING TO KNOW THE MACHINE” and is included
under this heading.
When referring to headings, usually only the relati-
ve number is specied, e.g. “See 2.3.1”.
1.2 SYMBOLS
WARNING symbol. Failure to observe
the instructions provided may result in

MANDATORY symbol. Used to indicate
that an operation is mandatory.
PROHIBITION symbol. Used to indicate
that an operation is prohibited.
NOTE symbol. Indicates information or
details which are particularly important
REFERENCE symbol. Indicates a refe-
rence to information, the note alongsi-
de indicates where the nformation can
be found.
1.3 TAKING CARE OF THE MANUAL
Keep the manual in good, legible condition, in a
place which is known and easily accessible to the
machine user.
2 GETTING TO KNOW THE
MACHINE
The machine described herein is gardening
equipment, a ride-on lawnmower to be precise,
with front cutting.
The machine is tted with an engine which acti-
vates the cutting means assembly, protected by a
safety guard, as well as a drive unit which moves
the machine.
The machine is articulated. This means that the
frame is divided into a front section and a rear
section which can be steered in relation to one
another.
The articulated steering allows the machine to turn
smoothly round trees and other obstacles with a
very tight turning radius.
The operator can drive the machine and activate
the main commands from a sitting position in the
driver's seat.
The safety devices installed on the machine stop
the engine and the cutting means assembly.
2.1 MODELS [2WD]
This machine is rear wheel drive.
The rear axle is equipped with a hydrostatic
transmission with innitely variable forward and
reverse gear ratios.
The rear axle is also equipped with a dierential to
facilitate turning.
Front mounted accessories are activated by drive
belts.
2.2 MODELS [4WD]
This machine has 4-wheel drive.
The power from the engine to the drive wheels is
transferred hydraulically.
The engine activates an oil pump which, via a
hydraulic circuit, activates the rear and front axles
(wheels).
The front and rear wheels rotate at the same
speed.
Both axles are equipped with a dierential to make
turning easier.
Front mounted accessories are activated by drive
belts.
EN
ENGLISH
(Translation of the Original Instructions)
4
… 150 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga 740 WX - P 901 CH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga 740 WX - P 901 CH in the language / languages: All languages as an attachment in your email.

The manual is 110,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info