Manual Stiebel Eltron Thermofan Duo BHC 175 (page 13 of 26) (English, German, Dutch, French)

457719

Zoom out

Zoom in

1/26

English

BHC 175 L

  

 



  

26 20

C26_07_80_0021

3131

To do this, remove the sealing caps on the

feed (23) and return connectors (24).

2.4 Installation

BHC 175

BIf connected to the central heating system,

the heat carrier medium must be drained

first as described before.

Take the dimensions for drill holes from

the illustration of the BHC, depending on the

customer’s existing water connections, and

mark out on a wall with sufficient load-bear-

ing capacity. Observe minimum distances!

BInstall wall distance pipe (12) with enclosed

raw plugs Ø8 mm (19) and screws5x40

(13) depending on the construction of the

wall.

BPush the spacers (15) into the wall distance

pipe and screw into position with the ad-

justing screw M4 x 10 (14) (do not tighten).

BPosition the radiator with the two upper

cross-pipes on the upper spacers and secure

in position on the spacers by means of the

clamp (16) (M5 x 30 screw, 17).Then fix at

the bottom in the same way as at the top.

BLine up the radiator (push spacers into wall

bushes), tighten the adjusting screws in the

wall bushes at the top and put caps (18)on

the clamps.

BIf connected to the central heating system,

connect it to the feed- (23) and return

connectors (24).

Connect a thermostatic valve to the flow

pipe connection.

Bleed the radiator via valve (25) while filling.

BPlug in the mains plug (22).

BHC 175 L

BIf connected to the central heating system,

the heat carrier medium must be drained

first as described before.

Determine the dimensions of drill-holes

according to the fixing bolts (26) or deter-

mine it from the dimensional drawing of the

BHC-L and mark it on a sufficient load-car

rying wall, depending to the existing water-

connection-points.

Beware the minimum

distances!

BInstall the mount-hook (20) depending to

the wall construction with suitable mount

ing materials, e.g. with enclosed raw plugs

Ø8 mm (19) of and screws5x40(13).

BHang the radiator on the retaining hooks

with the fixing bolts (

26).

BPush caps (21) with “marking ridge upward”

onto the fixing wall (appliance is fixed).

BIf connected to the central heating system,

connect it to the feed- (23) and return

connectors (

24).

Connect a thermostatic valve to the flow

pipe connection.

For a water connection from below or the

right side of the equipment accessories are

attached, fitting to the unit :

two 90°-elbow unions (

31) and

– two extensions, one of 180 mm- (

28)

and another of 130 mm-extension (

29)

for the

connection from below or

– a 50 mm extension (30) for the connec-

tion from the right side of the unit.

Bleed the radiator via valve (25) while filling.

BPlug in the mains plug (22).

Electrical connection

The appliance must be connected to

AC 230V ~ 50/60 Hz only.

A socket must be installed at a distance of at

least 10 cm to the side of the heater for the

purpose of the connection.

2.5 Initial start-up

When it is started up for the first time, you

may notice a smell which is caused by any

manufacture-related residues on the radiator.

2.6 Hand-over

Explain the functions of the appliance to the

user. In particular, draw his or her attention to

the safety instructions. Hand over the operat-

ing and installation instructions.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiebel Eltron Thermofan Duo BHC 175 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiebel Eltron Thermofan Duo BHC 175 Manual

Product: