650338
24
Zoom out
Zoom in
Previous page
1/124
Next page
OPERATION
Appliance description
24 |DHE SLi www.stiebel-eltron.com
3. Appliance description
This appliance with full electronic control and output matching
keeps the outlet temperature constant. The water is heated by the
electronic control unit with motorised valve to precisely the select-
ed temperature. This occurs regardless of the inlet temperature.
DHW temperature
The DHW outlet temperature can be variably adjusted. The
selected temperature is displayed.
Heating system
The bare wire heating system has a pressure-tested copper casing.
The heating system is suitable for hard and soft water areas; it
has low susceptibility to scale build-up. This system ensures rapid
and efficient DHW availability.
Note
The appliance is equipped with an air detector that large-
ly prevents damage to the heating system. If, during op-
eration, air is drawn into the appliance, the heater shuts
down automatically for one minute, thereby protecting
the heating system.
Display backlighting
The display features two-tone backlighting (green/ amber).
Efficiency display
Green ECO backlighting indicates that the appliance is operating
in a particularly economical way
- when the output is less than 80%
- when the maximum output is less than 80% while the inlet
temperature is higher than 35°C
- when the maximum output is less than 80% while the ECO
function is switched on
Under all other operating conditions, the backlighting is amber.
Economy monitor
The appliance has an economy monitor. This is activated by press-
ing the appropriate key. It displays:
- Energy savings*
- Water savings*
- CO
2
savings*
- Energy consumption
- Water consumption
* Compared to hydraulic instantaneous water heaters. Calculation
for a 3-person household with individual DHW requirements and
usable energy requirements subject to VDI 2067. Electricity and
water costs can be programmed individually.
4. Settings and displays
You can adjust the appliance via the user interface.
Inlet temperature information
If the inlet temperature is higher than the preferred temperature,
e.g. if water has been preheated by solar energy, then the tem-
perature display flashes and the second display indicates the inlet
temperature. No further heating of the water occurs.
D0000033113
2
1
3
1 Temperature display flashes
2 Inlet temperature display
3 Scalding risk LED; red LED when the temperature setting
>43°C
Recommended setting for operation with a thermostatic valve
Set the temperature at the appliance to 60°C.
Following an interruption of the water supply
See chapter "Restarting"
4.1 User interface on the appliance
D0000033114
1
2
3
4
5
6
9
7
8
10
1 Temperature selector
2 Scalding risk LED
3 Memory key
4 Menu key, e.g. ECO
5 Additional value display
6 Heating output display
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiebel Eltron DHE 27 SLi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiebel Eltron DHE 27 SLi in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 43,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info