650330
11
Zoom out
Zoom in
Previous page
1/116
Next page
DEUTSCH
www.stiebel-eltron.com DHB-E SLi | 11
INSTALLATION
Außerbetriebnahme
11.2 Wiederinbetriebnahme
!
Sachschaden
Damit das Blankdraht-Heizsystem nach Unterbrechung
der Wasserversorgung nicht zerstört wird, muss das
Gerät mit folgenden Schritten wieder in Betrieb genom-
men werden.
Schalten Sie das Gerät spannungsfrei, indem Sie die
Sicherungen ausschalten.
Öffnen Sie die Armatur eine Minute lang, bis das
Gerät und die vorgeschaltete Kaltwasser-Zuleitung
luftfrei sind.
Schalten Sie die Netzspannung wieder ein.
12. Außerbetriebnahme
Trennen Sie das Gerät allpolig vom Netzanschluss.
Entleeren Sie das Gerät (siehe Kapitel „Installation/ War-
tung/ Gerät entleeren“).
13. Montage-Alternativen
13.1 Elektroanschluss Unterputz oben
26�02�02�1123
Schneiden Sie die Kabeltülle für das Netzanschlusskabel auf.
Drücken Sie den Rasthaken zur Befestigung der Netzan-
schlussklemme herunter. Ziehen Sie die Netzanschluss-
klemme heraus.
Versetzen Sie die Netzanschlussklemme im Gerät von unten
nach oben. Befestigen Sie die Netzanschlussklemme, indem
Sie sie unter den Rasthaken schieben.
Verlegen Sie die Schaltlitzen unter der Litzenführung.
13.2 Elektroanschluss Aufputz
Hinweis
Bei dieser Anschlussart ändert sich die Schutzart des
Gerätes.
Ändern Sie das Typenschild. Streichen Sie die Anga-
be IP 25 durch und kreuzen Sie das Kästchen IP 24
an. Verwenden Sie dafür einen Kugelschreiber.
!
Sachschaden
Sollten Sie versehentlich ein falsches Loch in die Rück-
wand brechen, müssen Sie eine neue Rückwand verwen-
den.
Schneiden oder brechen Sie die benötigte Durchführung in
der Rückwand sauber heraus (Positionen siehe Kapitel „In-
stallation/ Technische Daten/ Maße und Anschlüsse“). Ent-
graten Sie bei Bedarf scharfe Kanten mit einer Feile.
Führen Sie das Netzanschlusskabel durch die Kabeltülle.
Schließen Sie das Netzanschlusskabel an die Netzanschluss-
klemme an.
13.3 Große Leiterquerschnitte beim
Elektroanschluss unten
Wenn Sie große Leiterquerschnitte verwenden, können Sie die
Kabeltülle nach der Montage des Gerätes montieren.
1.
3.
4.
2.
26�02�02�1124
Vor der Montage des Gerätes drücken Sie die Kabeltülle mit-
hilfe eines Schraubendrehers heraus.
Schieben Sie die Kabeltülle über das Netzanschlusskabel.
Verwenden Sie die Montagehilfe aus dem Lieferumfang. Bei
einem Querschnitt >6mm² vergrößern Sie das Loch in der
Kabeltülle.
Schieben Sie die Kabeltülle in die Rückwand. Rasten Sie die
Kabeltülle ein.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiebel Eltron DHB-E 21 SLi electronic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiebel Eltron DHB-E 21 SLi electronic in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 31,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stiebel Eltron DHB-E 21 SLi electronic

Stiebel Eltron DHB-E 21 SLi electronic Usermanual and installation guide - English - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info