457705

Stiebel Eltron CON 10ZS Manual

11
Zoom out
Zoom in
Previous page
1/20
Next page
11
English Français
Niederlands
Mounting
To simplify installation, two wall mounting
brackets are provided. The convector is
mounted so that the wall mounting
brackets fit into the two openings in the
back of the appliance.
The two brackets must be screwed to the
wall by means of the two wood screws
at a distance “b“ (see the tab. 1, page 12)
6 mm plastic dowels are recommended.
The horizontal and vertical elongated holes
in the mounting brackets, allow any drilling
errors to be overcome.
After mounting on the wall, the heater is
secured at the bottom by a retaining
bracket which is screwed to the wall
(Fig. 4, distance: 293 mm).
The distance from the wall should under
no circumstances be less than 10 mm.
Towel rail (optional extra)
The towel rail is placed over the wall-
mounted appliance (see Fig. 4).
Fixation
Deux équerres de fixation au mur sont
jointes pour faciliter le montage. Le
convecteur est accroché de manière à ce
que les équerres de fixation au mur
s’engagent dans les fentes au dos du
convecteur soufflant.
Les équerres sont vissées à droite et à
gauche au moyen des vis de fixation (2 vis
à bois) avec un écartement “b“ (voir tab. 1,
page 12) au mur. Il est recommandé de
recourir à des chevilles en plastique de
6 mm.
Deux trous oblongs dans les équerres de
fixation permettent d’équilibrer horizon-
talement et verticalement l’installation du
convecteur soufflant.
Une fois le convecteur monté au mur,
il est ancré par l’équerre jointe au mur,
équerre qui est d’abord accrochée au
convecteur avant d’être vissée au mur
(fig. 4, cote 293 mm).
L’écartement par rapport au mur de 10 mm
qui en résulte ne doit en aucun cas être
diminué.
Porte-serviette
(accessoires en option)
Le porte-serviette est engagé par le haut
sur le convecteur installé (voir fig. 4).
Bevestiging
Om de montage te vergemakkelijken zijn
er 2 muurbevestigingshoeken bijgevoegd.
De convector wordt zo opgehangen, dat
de muurbevestigingshoeken in de ophangs-
pleten aan de achterkant van het apparaat
vallere.
De hoeken worden rechts en links met
bevestigings-schroeven (2 houtschroeven)
op een afstand “b“ (zie tab. 1, bladzijde 12)
aan de muur geschroefd. Het is aan te
bevelen, deuvels van kunststof 6 mm te
gebruiken.
Met het horizontale en verticale lange gat
in de muurbevestigingshoeken is er een
compensatie bij het verlopen van de
bevestigingsboringen mogelijk.
Na de muurmontage wordt het apparaat
beneden met de bijgevoegde steunhoek
beveiligd, hij wordt eerst aan het apparaat
ingehangen en daarna aan de muur vastge-
schroefd (afb. 4, afmeting: 293 mm).
De daaruit voortvloeiende muurafstand
van 10 mm mag in geen geval worden
verminderd.
Handdoekhouder
(speciale accessoires)
De handdoekhouder wordt van boven
over het aan de muur gemonteerd
apparaat gestoken (zie afb. 4).
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiebel Eltron CON 10ZS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiebel Eltron CON 10ZS in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info