469627
17
Zoom out
Zoom in
Previous page
1/44
Next page


ENGLISH
 
5.1 Starting heating
f Use the rocker switch to select one of the following operating
modes:
- Standard operation
- Operation with the time switch
Standard operation
The temperature is infinitely adjustable. The appliance switches
off as soon as the selected room temperature has been reached.
f Turn the temperature selector clockwise to the required
setting.
Operation with the time switch
The 24-hour time switch has 96 time segments. Every hour is di-
vided into 4 time segments of 15 minutes. The time switch has to
be reset when commissioning the appliance and after any power
interruption. To do this, turn the time switch clockwise until the
marker arrow points to the current time.
To select the required heating time, proceed as follows:
Press down the time segments around the circumference. Red
markings will become visible, indicating the preselected heating
time at which the appliance automatically starts to heat. If the
required room temperature has been reached during the heat-up
time, the appliance switches off. It starts again if there is a further
heat demand and will continue doing so until the selected heating
time has elapsed. This process is repeated daily. The heating time
can be adjusted at any time if required by pressing time segments
up or down.
5.2 Stopping heating / Frost protection
f Turn the temperature selector fully anti-clockwise.
In this setting, frost protection is only ensured if the rocker switch
is positioned for "Standard operation". The heater starts automati-
cally if the room temperature drops below the frost protection
temperature.
5.3 Taking the appliance out of use
f Pull the plug from the power socket.
6. Operation CKR 20 S
2
3
1
26_07_31_0213
1 Temperature selector
2 Rocker switch stage (Base heating stage)
3 Rocker switch stage (Quick heating stage)
6.1 Starting heating
f Turn the temperature selector clockwise to the required
setting.
The temperature is infinitely adjustable. The appliance switches
off as soon as the selected room temperature has been reached.
You can use the rocker switch to choose between the following
two outputs with matched fan motor speed:
Base heating stage
Set the rocker switch to "I". Provided that the appliance has been
switched on via the temperature selector, it will heat with an
output of 1000 W at the slow fan stage.
Hinweis
Never operate the appliance at standard heating stageI,
if the room where the appliance has been installed has
cooled down severely.
f If the room has cooled down severely, switch the ap-
pliance to rapid heating stageII in order to ensure
normal appliance operation.
Quick heating stage
Set the rocker switch to "II". Provided that the appliance has been
switched on via the temperature selector, it will heat with an
output of 2000 W at the quick fan stage.
Select the powerful quick heating stage if you need to heat up a
cold room rapidly to the selected temperature. Afterwards, set the
rocker switch back to stage "I".
Once the preselected room temperature has been reached, the
appliance switches off. The appliance then starts and stops heating
as necessary to keep the room temperature constant.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiebel Eltron CKR 20S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiebel Eltron CKR 20S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stiebel Eltron CKR 20S

Stiebel Eltron CKR 20S User Manual - English, German, Dutch, French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info