Manual Stiebel Eltron BGC 2-60 (page 11 of 60) (English, German, Dutch, French)

742474

Zoom out

Zoom in

1/60

OPERATION

SAFETY

ENGLISH

WWW.STIEBEL-ELTRON.COM BGC | 11

2. Safety

2.1 Intended use

The appliance is intended for installation in cylinders in a sealed

heating or DHW heating system.

This appliance is designed for domestic use. It can be used safely

by untrained persons. The appliance can also be used in a non-

domestic environment, e.g. in a small business, as long as it is

used in the same way.

Any other use beyond that described shall be deemed inappropri-

ate. Observation of these instructions is also part of the correct

use of this appliance. Any modiﬁcations or conversions to the

appliance void all warranty rights.

It is also incorrect to use the appliance to heat liquids other than

water, or water containing chemicals such as brine.

2.2 General safety instructions

WARNUNG Electrocution

Never spray the appliance with water or other liquids

WARNUNG Burns

Bei Temperatur-Einstellung größer 43°C kann sofort

Wasser hoher Temperatur ﬂießen.

WARNING Injury

The appliance may be used by children aged 8 and up

and persons with reduced physical, sensory or mental

capabilities or a lack of experience provided that they

are supervised or they have been instructed on how to

use the appliance safely and have understood the result-

ing risks. Children must never play with the appliance.

Children must never clean the appliance or perform user

maintenance unless they are supervised.

Note

While the threaded immersion heater is in use, the cyl-

inder is under mains water pressure.

During the heating process, expansion water will drip

from the safety valve. If water continues to drip when

heating is completed, please inform your heating con-

tractor.

2.3 Test symbols

See type plate on the appliance.

3. Equipment description

The appliance heats DHW electrically. You can adjust the tempera-

ture using the temperature selector. Once the selected tempera-

ture has been reached, the appliance switches off and restarts

automatically when required.

4. Settings

26�02�79�0033

The temperature is inﬁnitely adjustable. Temperature selection is

limited at the factory and can be adjusted by the heating contractor

(see chapter “Installation / Settings”).

You can interrupt the heating process by setting the temperature

selector to “cold” (see ﬁgure).

5. Cleaning, care and maintenance

 If the appliance is installed in a DHW heating system, please

note that almost every type of water deposits limescale at

high temperatures. Limescale builds up on the heating ele-

ment in particular and has to be removed occasionally by the

heating contractor.

 Always take the increased anode wear into consideration

when using the threaded immersion heater in cylinders with

protective magnesium anodes. Protective anodes and heat-

ing elements should be checked after approx. one year.

 Regularly activate the safety valve to prevent it from becom-

ing blocked e.g. by limescale deposits.

6. Troubleshooting

Fault Cause Remedy

The water does not

heat up.

There is no power.

Check the fuse/MCB in

your fuse box/distribu-

tion panel.

The temperature is incor-

rectly adjusted.

Check the temperature

selection.

If you cannot remedy the fault, notify your heating contractor. To

facilitate and speed up your enquiry, please provide the serial

number from the type plate (no. 000000-0000-000000):

BGC Nr.: 000000 - 0000 - 000000

Made in Germany

26�02�79�0048

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiebel Eltron BGC 2-60 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiebel Eltron BGC 2-60 Manual

Product: