780433
19
Zoom out
Zoom in
Previous page
1/89
Next page
18
Adjusting the Bicycle to the Rider
In the case of stems with four-bolt clamping, be sure to retighten
the bolts evenly and alternately to the prescribed torque value. The
clamping slots in the top and bottom area as well as on the right and
on the left must be evenly and of identical width.
Bar ends give you additional ways of gripping the handlebar. They are
usually fixed in a position that gives the rider a comfortable grip when
pedalling out of the saddle. The bar ends are then almost parallel to the
ground or tilted slightly upwards.
Release the bolts, which are usually located on the underside of the
bar ends, by one to two complete turns.
Turn the bar ends to the desired position and make sure the angle is
the same on both sides.
Retighten the bolts to the required torque.
Check the firm seat of the bar ends by trying to twist them out of
position.
Carefully retighten the clamping bolt(s). Try to turn the handlebars
relative to the stem. Retighten the bolted connections, if necessary.
Observe the maximum torque value (see also chapter “Recommend-
ed Torque Settings”).
After adjusting the handlebars you need to adjust the brake and shift
levers.
Release the Allen bolts at either grip binder.
Turn the levers relative to the handlebars. Sit in the saddle and place
your fingers on the brake levers. Check whether the back of your hand
forms a straight line with your lower arm.
Retighten the levers and check whether they resist twisting and
turning! In doing so observe the specified torque values in chapter
“Recommended Torque Settings“.
Danger:
Note that the bolted connec-
tions of stem, handlebars,
bar ends and brakes have
to be tightened to their
specied torques. You will
nd the respective values
in chapter “Recommended
Torque Settings“. If you
disregard the prescribed
values, the components may
come loose or break. This
can lead to a severe crash.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stevens MTB 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stevens MTB 2014 in the language / languages: English as an attachment in your email.

The manual is 11.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stevens MTB 2014

Stevens MTB 2014 User Manual - German - 91 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info